| About this product | |
|---|---|
| Product | Carmageddon 2 |
| Vendor | SCi |
| Tested operating systems | Windows 2000 Windows NT 4.0 Windows Vista 32 Bit Windows XP 32 Bit |
| Average rating | |
| CompatDB XML | carmageddon-2.xml |
Compatibility Reports for Carmageddon 2
Reported by Anonymous
Rating
Operating system
Windows 2000
Date
-
Reported by Anonymous
Rating
Operating system
Windows XP 32 Bit
Date
-
Reported by Anonymous
Rating
Operating system
Windows 2000
Date
-
Reported by Anonymous
Rating
Operating system
Windows Vista 32 Bit
Date
-
Reported by Anonymous
Rating
Operating system
Windows XP 32 Bit
Date
Windows xp home edition
Reported by nograd-hXc
Rating
Operating system
Windows 2000
Date
-
Reported by Anonymous
Rating
Operating system
Windows XP 32 Bit
Date
Works fine with slight exception to menu graphics glitch. Go here for more info: http://www.ntcompatible.com/forums/viewtopic.php?t=23387&highlight=carmageddon+openglide+crack+joystick+bug+gamepad+640x480+CARMA2_HW.EXE+DosFreak+Glide2x.dll+shortcut+changed+OpenGL+0.08+patch
Reported by Anonymous
Rating
Operating system
Windows 2000
Date
Must use No-CD patch to eliminate Not supported on NT error if the game has been patched.
Crashes if Gamepad is installed
Reported by Anonymous
Rating
Operating system
Windows XP 32 Bit
Date
USE qfixapp and enable "force direct draw emulation" otherwise it just didnt want to display anything and keeps bombing out to windows
Reported by Anonymous
Rating
Operating system
Windows 2000
Date
-
Reported by Anonymous
Rating
Operating system
Windows XP 32 Bit
Date
Received the follow messages:
1) It says "Sorry, not supported on Windows NT" (In compatibility mode too)
2) Follow other instructions above to do with 'no-cd' hack. AND, unplug any USB gamepads you might have plugged in.
Reported by Anonymous
Rating
Operating system
Windows NT 4.0
Date
-
Reported by Anonymous
Rating
Operating system
Windows XP 32 Bit
Date
-
Reported by Anonymous
Rating
Operating system
Windows 2000
Date
Received the follow messages:
1) When trying to run either the software or D3D version the executable states that it will not work on the current version of NT. The utill off the NT 4.0 CD does not seem to solve the problem either. This is an original boxed version.
2) Does not work straight from the box - but it's only the copy protection that is stopping it. I applied the v2.0 patch, and removed the safedisk protection and it runs just fine.
3) 1. Install Carmageddon 2 from CD. Apply 2.0 Patch (see ftp.avault.com/patches/c2ptch12.exe). 2. Put Glide2x.dll in the Carmageddon directory (unclear whether this is necessary, but I did it). 3. Run UnSafeDisc 1.5.5 (see http://gamefix.moax.com/files/unsafediscv1.5.5.zip) on Carma2_HW replace Carma2.HW.EXE with whichever of Testme.exe or Testme2!.exe works. Don't worry if you get a BRender Error when you run this file directly (i.e. not from Carma2.exe). 4. Run UnSafeDisc 1.5.5 on Carma2_SW replace Carma2.SW.EXE with whichever of Testme.exe or Testme2!.exe works. 5. You should now be able to run Carma2.exe and play Carmageddon 2 under Windows 2000.
4) worked fine after installing DirectX8.0a Notes: Dell Dimension 4100 Intel PIII 733MHz 256MB RAM NVidia Geforce 256 video card
Reported by Anonymous
Rating
Operating system
Windows NT 4.0
Date
Require 3Dfx
accelerator under NT with installed Glide and Dx5 patch.
