Installs but crashes when you start it and tell it you are an existing Quicken user (even when "Run as Administrator" is used).

The Intuit web site states that Quicken 2007 has been tested on Vista and there are no Know issues.
This is NOT true, the software works in some instances but for all intents and purposes on my system it doesn't work at all.

Details:
Quicken intstalled on my Windows Vista Business edition withoug incident.
Quicken requires registration and the registration process fails consistently.
Since I cannot register, I cannot go on-line to my financial institution.
Quicken 2007 REFUSES to remember the current file and every time I start Quicken, I must tell it manually and specifially which file to open.
Attempts to backup using the Quicken softwqre the backup fails saying that it cannot open the source file.
I am sure there are MANY other apects of the program that also do not work properly under Vista, but the above listed ones are enough to prevent me totally from trying to use the system.
I contacted Quicken chat support and they stated clearly that Vista was not supported but they were working on it. I pointed out that the Intuit web site said that Quicken 2007 was OK for Vista and they said no it is not.
The cannot/willnot help and I'm told I have to wait for developmental changes.
As of this moment, Quicken 2007 does not work (for me) in a Vista Business environment amd Intuit is of absoulutely no help in making it work. It seems to me that their "testing" under Vista may have consisted of showing the Vista box to the developers and little if anything more.

No problem to report, Software work just fine

Haven't had any issues, been running on Vista Business for some time now.

Using Quicken 2007 with Vista Ultimate -- same problem others are reporting with Quicken not recognizing existing stored Quicken files and starting each new session as "New User". Worked absolutely fine with VISTA RC1, but when I got full retail install of new Vista Ultimate, this problem arose and has persisted for nearly a week.

When I am logged on as a standard user, I experience the same problems as others here. I have to tell it that I am already a Quicken user, thatI have a data file on the PC, and then tell it where the file is located.

When I try to update my accounts using One Step Update, the "Quicken Launcher" crashes, and that's all she wrote. It looks to me that Quicken cannot run properly as a standard user, and instead requires the logged on user to be an admin.

Works fine for me under Vista home ultimate. No noticable problems (yet!).

I am running Quicken Premiere 2007 with Windows Vista Ultimate and I am unable to download my banking data or back-up my data. Intuit, if you're listening, PLEASE expedite a new release that addresses the Vista issues.

I am running Quicken 2007 with Vista Ultimate Edition. I am running into some problems with online services. I cannot download my transactions from my banking institutions. When I click on update nothing happens.(It looks like the process just hangs). I called customer Support (Intuit) and they said they wouldn't support Quicken with Vista as it had not been tested.) I was running it fine with Vista RC1 and RC2. I have however found that if I go to the website directly from IE I can download the transactions and then they are automatically entered into quicken. I am also having other problems on the bank site itself. But I believe they are related to Vista and not to Intuit.

Windows Vista Ultimate. Quicken 2007 is very quirky. Do not under any circumstances apply the R4 patch on Vista Ultimate. After it takes 20 full minutes of spinning(!) - on a 3ghz machine with 2gb ram(!) - the very first download from your bank results in need to accept downloaded transactions, but none appear in the register to accept(!) Worse, either the R4 update or the initial conversion of your 2006 files to 2007 format corrupts your c:\users folder's security settings, all the way down through all the hundreds of subfolders. The R4 patch you can manually download has exactly the same problems as the automatic one.

The only safe way and I don't know how safe it really is, to use 2007 with Vista Ultimate is to take a system checkpoint, install 2007 WITHOUT accepting the R4 patch, convert your 2006 files, then restore the system checkpoint (to get your security settings back), then uninstall 2007 completely, then reinstall it WITHOUT the R4 patch.

Good luck.

Using Quicken Premiere 2007 with Windows Vista Ultimate and, like others, the launcher fails and that's it. Cannot restore previous files nor convert. In short, Intuit blew it by not making thier software XP compatible and now we pay the price; Not ready for prime time.

Premier 2007 Quicken by Intuit installed and ran nicely on Windows XP but when trying to install on Windows Vista the installation stalled after what seemed like "almost" completing and indicated "not responding" to where it was necessary to cancel the program. It then would not allow the removal, recovery or anything else. Does anyone know of a fix?

Uninstall 2007 completely. Then download the Microsoft Install cleanup utility. Run it and remove any Quicken entries. The hung-up install is what's causing you to be unable to run it.

Now boot the system and re-install 2007. DO NOT ACCEPT THE "LATEST UPDATE" offering. 2007 will install and you can use it. The R4 patch applied by "latest update" doesn't work with Vista Ultimate.

Read the entry above about security corruption in the \users folder and how to avoid it.

Can't get Quicken to print to two separate HP Printers (Photosmart 8150 and PSC1210). Had no problems running under 32 bit Vista Ultimate. Did a clean install of 64 bit Vista Ultimate, loaded Quicken 2007 and can't get anything to print. The printer actually grabs the paper and advances to the top of the page and then just sits there. Technical support was no help. Had me trying to emulate other HP printers and yes, even some printers from other manufactures (like that was going to work). Has anyone else had similar problems? Seems strange that everything would work fine with 32 bit Vista Ultimate and not with 64 bit.

Quicken 2007 home and business will not print invoices on my new lexmark 7300 series printer, I have the new vista system also. I can print everything else on my computer but not Quicken

Doesn't install at all using Vista Basic. Hangs on update. Installation process doesn't enable you to bypass update.

Windows Vista Premium has made my Quicken 2007 program useless. Even when I start the program with "run as administrator", I get the start up menu and have to go through an install. Then it refuses to take updates even when I save the web connect file to the desktop and import. With Windows XP, neither of these problems occurred. Luckily for me, I have an old, slower computer with XP so I can continue to use my Quicken. Hopefully, this will get resolved by 2008, and I can then switch to my new computer. I am not impressed with the quality of help given by Intuit either over the phone or with the online chat. Since these problems are so pervasive, you would think they would have been able to come up with a fix by now, or at least inform the user that this is a problem that many users are having.

I updated from Windows XP Professional to Vista Business edition and now Quicken Premier 2007 will not Accept financial updates - in fact the "Accept" buttons no longer appear. Also the program asks repeated on start-up if its the default program for "Web Connect"....it will not update or can not update the system registry in Vista.

I have the same symptom mentioned previously: unable to print at all to an HP printer with Quicken 2007 and Vista Ultimate 64-bit. The paper feeds into the printer and then hangs indefinitely with nothing printed.

Yes, Quicken print under 64-Bit Vista initializes the printer, but just sits there. No amount of printer setting twiddling gets it going. I have the problem, but don't yet know the solution. Yes, Quicken support bites the big one.

Everything was fine with Quicken 2007 on Vista until it wanted to download an update (always the kiss of death, it seems). Now I can't open it, re download it, or uninstall it. It's a mess.

I run the Microsoft Install cleanup utility, and it will at least allow me to re-install quicken 2007 to RS1. However, as soon as I attempt to update to any higher release, the update utility program locks up and I am hosed...

Vist Ultimate and Quicken 2007 were not made for each other.

Here the issue I have internet connection and when I click update (connection for bank not for R4) I get no internet connection detected box. When I click ignore the box pops back up I click
ignore again and it connects to my bank and download.

I wrote this on the quicken foums and all they could do was complain that I didn't give them an error # because I didn't get one duh!

So next time I press cancel and got error #67108866 no respones for anyone from quicken.

I have no issues in XP so I can only assume it something different that Microsoft did with vista to cause this error.

What ticks me off is Intuit seems not to care if their product work or is just blowing it off as user error! I been using quicken since quicken 2000. I use it for online banking with Bank of America. Called my bank they told me they weren't supporting Vista yet.

Running under Vista Ultimate with a Radeon graphics board - Q2007 runs, but display behavior is odd (refreshing odd things at odd times) and, 3-5 times per week, it causes Windows Manager to crash. Apps keep working after this, but it is annoying, at best.

Running Vista Home Premium - Couple minor issues to report.

1) No sound on intial opening.
2) Keeps prompting me to update - If I update, the program stops working and won't open. The only way to fix it is to reinstall it. Trying to uninstall it doesn't work either however. I have to use the Windows Cleanup Utility and then reinstall. So now I don't update. I try and check the box that says "Don't Remind Me Again...", but it keeps on reminding me.

Minor annoyances, but otherwise works fine...

I'm running Vista Ultimate x64 and all other apps work and print great. System has 2GB RAM and AMD CPU. I continue to experiance the same issue(s) and lack of help from Quicken support as posted above w/ not being able to print. I'm a PC tech by trade and I've come up w/ a BIG FAT 0 for answers to this no printing issue from Quicken Support.

I've found 2 work arounds for the printing issue. #1, IF you can get quicken to install correctly you will get a Quicken PDF Printer installed in your printers directory. Print your file to the quicken PDF Printer and save the file to the PC. Then launch Adobe Reader and print the file. This is extra time consuming, but works. #2, I have been able to print from Quicken to a network printer. I've tried this in multiple locations and get positive results each time. While not all users have a network printer to use setting up a USB Print server is pretty quick and painless. Depending on where you're at you should be able to call your local in home tech support for this assistance. The hardware for this will cost you some $$ though.

I have just upgraded to Vista Ultimate from XP using a clean install. Quicken 2007 installed OK but when it came to activating, it could not connect to the internet.

To get it to work, I tried setting the compatibility mode for all Quickem executables to Windows 2000.

The program then activated as expected and (to date!) there are no apparent problems.

Hope this helps,

David

I had quicken 2007 DeLuxe installed in my computer with windows vista home premium. It was working OK. My Hard drive crashed. I purchased a new computer and I tried to install the Quicken into it. At first it was going in, then when it asked to be Up-dated, I clicked on that. That killed the program from completing the installation. It gets stopped from installing. The wizard stops it. I tried to uninstall and it will not remove whatever has been installed. I tried Quicken clean and it doesnot work. I tried to follow all kinds of the removing processes and nothing seems to work. Looks like I am stuck without the Quicken program. Any suggestions would be greatly appreciated.
Pet.

I been using Quicken 2007 Deluxe on Windows XP and when I loaded it on my new computer With Vista Business it does not open at all. I have contacted Intuit and have got nothing but a run around. I can't even talk to a human. They say to go on line, fill out an unbeleivable amount of repetitive questions and they will return your call in ten minutes. They sent me and email saying they tried to call me but got no answer.

I have callwaiting and caller ID and there were no calls from them. So, the only conclusion I can come to, is that they have no idea how to fix the problem but they do know hos to strecth the truth. I am thinking of trying MS Money. Does anybody know if I can transfer my Quicken 2007 data to MS Money or if MS Money will operate on Vista

Tom Fleming

My quicken 2000 is installed on windows vista, bt im not able to print anything from it?

Helping a friend here with this one. She was using the Quicken 2007 Deluxe when an automatic update window popped up asking to upgrade or patch the program. After clicking yes and allowing the update to run she returned to find the program inoperable. Checking I found the start-up qw.exe file to be missing from the computer. Vista unistall of Quicken starts but does not complete and seems to disappear into limbo or something. Using the original disk yields options to modify, repair or unistall, none of which will work. Right now I am at a loss as what to do.

Ijust spent an hour trying to get the install of Quicken 2007 premier working on my windows vista ultimate 64 bit OS.

First, after installing Quicken, immediately update to release 5. In my install I did this outside the application choosing to manually download the release and then right click "run as adminstrator". You can get a list of releases from quicken through this link:

https://quicken.custhelp.com/cgi-bin/quicken.cfg/php/enduser/std_adp.php?p_faqid=4370\

After sucessful update to R5, i was prompted to register the product. This is where the problems began. I would enter my ID and Password and then try to update. When I clicked "finish" quicken crashes. I then noticed that i was getting a webpage popup upon finshing my registration. Make sure to check IE for the quicken prompt page. If you dont go to the IE page Quicken just hangs waiting for a response from you.

I had the idea to reset my password. Upon doing so, i was able to register without a hitch.

Hope this helps someone.

I purchased a new computer with Vista Home Premium. My old computer was running on Windows XP. I purchased the Vista-XP Transfer cable, and transferred all my files using this process. It was long, but efective. I then used a beta program for the cable to transfer compatible programs. Among others, Quicken 2007 transferred effecively.
I could run Quicken 2007 smoothly, to include downloads from banks and credit cards. Then without warning, when I tried to download financial data, it quit accepting the data. When I go to the bank or credit card, I get a Quicken Install window, which eventually stops and ask for the Quicken 2007 CD, looking for the Quicken 2007.msi file. Since I updated quicken 2006 to 2007 online, I don't have the install CD. Of course, the Quicken 2008 CD does not work.

I am unable to download financial date directly, which is a pain in the _ _ _! I can always print transactions and then manually enter them into the files, but, let's get real!!!

I do believe that I had a Quicken Window Update, and I accepted the update. Perhaps that's what th problem is.

Using Quicken with Vista Ultimate. When closing the program either with or without backing up, the computer freezes for at least 10 to 15 minutes, nothing works. Working on 64 bit HP system. Any ideas?

-