A7N8X
This is a discussion about A7N8X in the Windows Hardware category; Well I have had this board for about 6 months now and I am finally encountering the infamous sound crackling problems? Has anyone found a solution to this? I am hoping not to have to deal with the insanity and morons at the nforcershq forum.
Well I have had this board for about 6 months now and I am finally encountering the infamous sound crackling problems? Has anyone found a solution to this? I am hoping not to have to deal with the insanity and morons at the nforcershq forum.
Participate in our website and join the conversation
This subject has been archived. New comments and votes cannot be submitted.
Sep 15
Sep 29
0
4 minutes
Responses to this topic
If you don't have the deluxe version, I would suggest to directly use the RealTek (latest beta) drivers for the onboard sound. I use them and don't have any problems (well, not right now lol )
OP
Quote:If you don't have the deluxe version, I would suggest to directly use the RealTek (latest beta) drivers for the onboard sound. I use them and don't have any problems (well, not right now )
Actually I do have the deluxe version. I should have stated that
Actually I do have the deluxe version. I should have stated that
Do you have the engineering rev 2.xx board or the previous version board ?!?
Also you have flashed the firmware to the latest version to I presume.
I have a v2.xx board and haven't noticed this problem, well not yet anyways. Hopefully it never will happen
Also you have flashed the firmware to the latest version to I presume.
I have a v2.xx board and haven't noticed this problem, well not yet anyways. Hopefully it never will happen
OP
Quote:Do you have the engineering rev 2.xx board or the previous version board ?!?
Also you have flashed the firmware to the latest version to I presume.
I have a v2.xx board and haven't noticed this problem, well not yet anyways. Hopefully it never will happen
I have the 1.04 version. I believe I have the latest bios release by Asus. I'll check again though. I didn't notice it untill recently. I started noticing during deep sounds in RTCW and BF1942. I have since noticed it in winamp. All my sound levels seem to be at very conservative values.
Also you have flashed the firmware to the latest version to I presume.
I have a v2.xx board and haven't noticed this problem, well not yet anyways. Hopefully it never will happen
I have the 1.04 version. I believe I have the latest bios release by Asus. I'll check again though. I didn't notice it untill recently. I started noticing during deep sounds in RTCW and BF1942. I have since noticed it in winamp. All my sound levels seem to be at very conservative values.
By the v1.04 do you mean the firmware or the engineering rev of the mobo ;(
OP
Quote:By the v1.04 do you mean the firmware or the engineering rev of the mobo ;(
Rev 1.04
Rev 1.04
Here's the latest bios revs for both the v2.xx boards and the pre-v2.xx boards
http://www.asus.com/support/download/item.aspx?ModelName=A7N8X%20Deluxe
http://www.asus.com/support/download/item.aspx?ModelName=A7N8X%20Deluxe
OP
Quote:Here's the latest bios revs for both the v2.xx boards and the pre-v2.xx boards
http://www.asus.com/support/download/item.aspx?ModelName=A7N8X%20Deluxe
Thanks. That will save me some time looking for it. I'll make sure mine is current when I get off work.
http://www.asus.com/support/download/item.aspx?ModelName=A7N8X%20Deluxe
Thanks. That will save me some time looking for it. I'll make sure mine is current when I get off work.
do this it should get rid of the crackling probs:
In the Mixer change the Routing Volumes to the following:
Original Sound: 50-60%
Reverb: 15%
Chorus: 55%
This will get rid of the crackling, Ive had the board since late march early april and have not had a crackling problem since I started using these vaules.
I made a picture too if you want to get a better look at what Im talking about
http://home.midsouth.rr.com/thc129/changes.JPG
In the Mixer change the Routing Volumes to the following:
Original Sound: 50-60%
Reverb: 15%
Chorus: 55%
This will get rid of the crackling, Ive had the board since late march early april and have not had a crackling problem since I started using these vaules.
I made a picture too if you want to get a better look at what Im talking about
http://home.midsouth.rr.com/thc129/changes.JPG
OP
Quote:do this it should get rid of the crackling probs:
In the Mixer change the Routing Volumes to the following:
Original Sound: 50-60%
Reverb: 15%
Chorus: 55%
This will get rid of the crackling, Ive had the board since late march early april and have not had a crackling problem since I started using these vaules.
I made a picture too if you want to get a better look at what Im talking about
http://home.midsouth.rr.com/thc129/changes.JPG
Thanks; I'll try that. I haven't had the motivation to download the newest bios.
In the Mixer change the Routing Volumes to the following:
Original Sound: 50-60%
Reverb: 15%
Chorus: 55%
This will get rid of the crackling, Ive had the board since late march early april and have not had a crackling problem since I started using these vaules.
I made a picture too if you want to get a better look at what Im talking about
http://home.midsouth.rr.com/thc129/changes.JPG
Thanks; I'll try that. I haven't had the motivation to download the newest bios.
tell me how that worked for ya, Im curious to know if it works in general or just on my board...
OP
Quote:tell me how that worked for ya, Im curious to know if it works in general or just on my board...
It seems to have worked. I havn't experienced the crackling since I tried that. I havn't used it all that much but I tested it out with soem music and it sounded fine.
It seems to have worked. I havn't experienced the crackling since I tried that. I havn't used it all that much but I tested it out with soem music and it sounded fine.
