AMD, Asus K7V, Win2k and Linksys

This is a discussion about AMD, Asus K7V, Win2k and Linksys in the Windows Networking category; Ok. . . this has to be the oddest error. Here's my system specs: AMD Athlon SlotA 800Mhz Asus K7V w/ latest BIOS rev (1007) Via KX133 chipset w/ latest 4in1 drivers 640MB RAM Linksys Etherfast 10/100 PCI NIC v4.

Windows Networking 2246 This topic was started by , . Last reply by ,


data/avatar/default/avatar19.webp

4 Posts
Location -
Joined 2001-04-17
Ok...this has to be the oddest error. Here's my system specs:
AMD Athlon SlotA 800Mhz
Asus K7V w/ latest BIOS rev (1007)
Via KX133 chipset w/ latest 4in1 drivers
640MB RAM
Linksys Etherfast 10/100 PCI NIC v4.1 w/ latest drivers.
Windows 2000 Pro
 
This NIC is fully compatible w/ 2K and when I install it, I get the following error that I cannot find on MS Knowledgebase, Linksys Tech support has never seen it...When i first got this system I had the same problem and a friend of mine spent a whole day tweaking it to work. I had to reformat..
 
Hardware Wizard:
Error:
The INF or the device information set or element does not match the specified install class.
 
puts an exclamation mark in Device manager on my NIC and sets a Code 1 to reinstall my drivers...nothing works.
 
thx in advance.

Participate in our website and join the conversation

You already have an account on our website? To log in, use the link provided below.
Login
Create a new user account. Registration is free and takes only a few seconds.
Register
This subject has been archived. New comments and votes cannot be submitted.
Apr 17
Created
Apr 17
Last Response
0
Likes
3 minutes
Read Time
User User
Users

Responses to this topic


data/avatar/default/avatar40.webp

3087 Posts
Location -
Joined 2001-01-21
Got anything in PCI slot 1? Sometimes PCI 1 and the AGP slot share an IRQ, which is a problem. Try putting it in another PCI slot if possible.
Make sure youve got the latest drivers for all your hardware, not just the mobo and NIC.
Have you tried different versions of the Via drivers? Linksys?
Do you have Service Pack 1 installed?

data/avatar/default/avatar19.webp

4 Posts
Location -
Joined 2001-04-17
OP
Well I tried a 3Com card, a Generic NIC, and my Linksys NICs version 1, 2 and 4 ..none worked. So this leads me to believe that NO Nics are going to work. Im formatting again right now...going with a second clean install.
 
I had W2k Sp1 installed w/ the latest Asus K7V mobo bios, Via 4in1's and Linksys 4.2 drivers.
 
by the way, my Videocard is PCI. I put the Linksys NIC in PCI slot #1 just incase..still no go.

data/avatar/default/avatar19.webp

4 Posts
Location -
Joined 2001-04-17
OP
Well, I fixed it. The clean install of 2000 Pro and the first set of drivers i installed was the linksys NIC card, and not Sp1. Not sure if that had anything to do with it...but im in total relief. Don't have to buy a new system...
 
thanks for your ideas...

data/avatar/default/avatar40.webp

3087 Posts
Location -
Joined 2001-01-21
SP1 sometimes causes problems for people. I havent had a problem with it, but everyone has a different pc, so sometimes one size does not fit all.
There seem to be some things that just go out of whack with SP1, and Ive never heard a reason why it does. Bad luck is all I can figure.