ASUS A8V Deluxe & WD 1200JD SATA 0x0000007B
This is a discussion about ASUS A8V Deluxe & WD 1200JD SATA 0x0000007B in the Everything New Technology category; Just the one SATA Drive on the SATA channel 0 black connector( not RAID, red connectors ) CDRW on IDE Primary 1 Master Getting the 0x0000007B etc error on new install. F6 driver is VIA VT6420 otherwise WinXP will not see the drive.
Just the one SATA Drive on the SATA channel 0 black connector( not RAID, red connectors )
CDRW on IDE Primary 1 Master
Getting the 0x0000007B etc error on new install.
F6 driver is VIA VT6420 otherwise WinXP will not see the drive.
Any solutions would be welcome
Thanks
Ian
CDRW on IDE Primary 1 Master
Getting the 0x0000007B etc error on new install.
F6 driver is VIA VT6420 otherwise WinXP will not see the drive.
Any solutions would be welcome
Thanks
Ian
Participate in our website and join the conversation
This subject has been archived. New comments and votes cannot be submitted.
Aug 11
Aug 11
0
1 minute
Responses to this topic
Go to Via Arena and d/l the latest RAID drivers.
You need to create a drivers disk with both the RAID and IDE driver sets on a floppy.
Then restart the install and press F6 and chose both the RAID and the IDE mode drivers to install.
Don't ask me why but even if you don't use RAID mode, that chipset assumes RAID so you still have to install them during the initial installation
You need to create a drivers disk with both the RAID and IDE driver sets on a floppy.
Then restart the install and press F6 and chose both the RAID and the IDE mode drivers to install.
Don't ask me why but even if you don't use RAID mode, that chipset assumes RAID so you still have to install them during the initial installation
