CD Burner Help!!
Using Hewlett Packard, Windows ME The computer i'm using has a burner install internally so my cd-drive is the burner. Now i cannot burn any Cds for some reason. I'm using Nero Burning ROM v6 but it comes with a burning software too called Easy Creater 4 Here's the log: Windows 98 4.
Using Hewlett Packard, Windows ME
The computer i'm using has a burner install internally so
my cd-drive is the burner.
Now i cannot burn any Cds for some reason.
I'm using Nero Burning ROM v6 but it comes with a burning software too called Easy Creater 4
Here's the log:
Windows 98 4.90 (ME)
IA32
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 6/8/2000 5:00:00 PM
ahead WinASPI: File 'C:\PROGRAM FILES\AHEAD\NERO\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <LG CD-RW CED-8080B> Version: 1.20 - HA 0 TA 0 - 6.6.0.8
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LG CD-RW CED-8080B >Version: 1.20 - HA 0 TA 0 - 6.6.0.8
Adapter driver: <ESDI_506> HA 0
LG CD-RW CED-8080B (Target 0, M:): Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ?
Excluded drive IDs:
WriteBufferSize: 24117248 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 127MB (130556kB)
Free physical memory: 0MB (752kB)
Memory in use : 100 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.4.2005
CD-ROM (ISO)
5:55:46 PM #1 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
5:55:46 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
5:55:46 PM #3 Text 0 File Writer.cpp, Line 122
Writer LG CD-RW CED-8080B running
5:55:46 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
5:55:46 PM #5 Text 0 File Burncd.cpp, Line 3153
Turn on Track-At-Once, using CD-R/RW media
5:55:58 PM #6 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 340466 ( 75:41.41)
5:55:58 PM #7 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
5:55:58 PM #8 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: LG CD-RW CED-8080B;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
5:55:58 PM #9 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)
5:55:58 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 340467 (340467) = #340467/75:39.42
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 340465 blocks [LG CD-RW CED-8080B]
--------------------------------------------------------------
5:55:58 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LG CD-RW CED-8080B] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 697583616, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
340467 | lead-out | 1 | 0x41 | 0x00
5:55:58 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 2 run-out blocks from end of track 1. Length: 340467 -> 340465.
5:55:58 PM #13 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
5:55:58 PM #14 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
5:55:58 PM #15 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
5:55:58 PM #16 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 8x (1,200 KB/s)
5:55:58 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:05:29 PM #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:05:30 PM #19 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 8x (1,200 KB/s)
6:05:31 PM #20 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (1,200 KB/s)
6:05:31 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:10:01 PM #22 SCSI -1119 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02C60000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x02 0x5D 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x09 0x00
6:10:01 PM #23 CDR -1119 File Writer.cpp, Line 311
Track following error
6:10:01 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:10:01 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
6:10:05 PM #26 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
LG CD-RW CED-8080B\H0 T0
6:10:05 PM #27 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack
6:10:05 PM #28 Text 0 File Mmc.cpp, Line 15908
<LG CD-RW CED-8080B > start Close Session
6:10:42 PM #29 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (1,200 KB/s)
Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 6/8/2000 5:00:00 PM
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 3/11/2002 11:55:38 AM
File 'IoSubsys\CDR4VSD.VXD': Ver=2.5 (088), size=197984 bytes, created 3/24/2000 2:50:00 AM
File 'IoSubsys\CDRALVSD.VXD': Ver=1.00 (1030), size=20047 bytes, created 3/8/2000 11:41:10 AM
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 7/28/2000 12:53:36 PM
File 'IoSubsys\CDUDF.VXD': Ver=3.01c (166S2), size=62853 bytes, created 4/27/2000 3:01:00 AM
File 'IoSubsys\CDUDFRW.VXD': Ver=3.01c (166S2), size=151303 bytes, created 4/27/2000 3:01:00 AM
File 'IoSubsys\CDRPWD.VXD': Ver=3.01c (166S2), size=44559 bytes, created 4/27/2000 3:01:00 AM
File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 6/8/2000 5:00:00 PM
File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 6/8/2000 5:00:00 PM
File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 6/8/2000 5:00:00 PM
File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 6/8/2000 5:00:00 PM
File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 6/8/2000 5:00:00 PM
File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 6/8/2000 5:00:00 PM
File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 6/8/2000 5:00:00 PM
Registry Keys:
Just when i tot it was fixed this had to happen "
The computer i'm using has a burner install internally so
my cd-drive is the burner.
Now i cannot burn any Cds for some reason.
I'm using Nero Burning ROM v6 but it comes with a burning software too called Easy Creater 4
Here's the log:
Windows 98 4.90 (ME)
IA32
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 6/8/2000 5:00:00 PM
ahead WinASPI: File 'C:\PROGRAM FILES\AHEAD\NERO\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <LG CD-RW CED-8080B> Version: 1.20 - HA 0 TA 0 - 6.6.0.8
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LG CD-RW CED-8080B >Version: 1.20 - HA 0 TA 0 - 6.6.0.8
Adapter driver: <ESDI_506> HA 0
LG CD-RW CED-8080B (Target 0, M:): Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ?
Excluded drive IDs:
WriteBufferSize: 24117248 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 127MB (130556kB)
Free physical memory: 0MB (752kB)
Memory in use : 100 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.4.2005
CD-ROM (ISO)
5:55:46 PM #1 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
5:55:46 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
5:55:46 PM #3 Text 0 File Writer.cpp, Line 122
Writer LG CD-RW CED-8080B running
5:55:46 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
5:55:46 PM #5 Text 0 File Burncd.cpp, Line 3153
Turn on Track-At-Once, using CD-R/RW media
5:55:58 PM #6 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 340466 ( 75:41.41)
5:55:58 PM #7 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
5:55:58 PM #8 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: LG CD-RW CED-8080B;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
5:55:58 PM #9 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)
5:55:58 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 340467 (340467) = #340467/75:39.42
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 340465 blocks [LG CD-RW CED-8080B]
--------------------------------------------------------------
5:55:58 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LG CD-RW CED-8080B] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 697583616, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
340467 | lead-out | 1 | 0x41 | 0x00
5:55:58 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 2 run-out blocks from end of track 1. Length: 340467 -> 340465.
5:55:58 PM #13 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
5:55:58 PM #14 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
5:55:58 PM #15 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
5:55:58 PM #16 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 8x (1,200 KB/s)
5:55:58 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:05:29 PM #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:05:30 PM #19 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 8x (1,200 KB/s)
6:05:31 PM #20 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (1,200 KB/s)
6:05:31 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:10:01 PM #22 SCSI -1119 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02C60000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x02 0x5D 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x09 0x00
6:10:01 PM #23 CDR -1119 File Writer.cpp, Line 311
Track following error
6:10:01 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:10:01 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
6:10:05 PM #26 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
LG CD-RW CED-8080B\H0 T0
6:10:05 PM #27 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack
6:10:05 PM #28 Text 0 File Mmc.cpp, Line 15908
<LG CD-RW CED-8080B > start Close Session
6:10:42 PM #29 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (1,200 KB/s)
Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 6/8/2000 5:00:00 PM
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 3/11/2002 11:55:38 AM
File 'IoSubsys\CDR4VSD.VXD': Ver=2.5 (088), size=197984 bytes, created 3/24/2000 2:50:00 AM
File 'IoSubsys\CDRALVSD.VXD': Ver=1.00 (1030), size=20047 bytes, created 3/8/2000 11:41:10 AM
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 7/28/2000 12:53:36 PM
File 'IoSubsys\CDUDF.VXD': Ver=3.01c (166S2), size=62853 bytes, created 4/27/2000 3:01:00 AM
File 'IoSubsys\CDUDFRW.VXD': Ver=3.01c (166S2), size=151303 bytes, created 4/27/2000 3:01:00 AM
File 'IoSubsys\CDRPWD.VXD': Ver=3.01c (166S2), size=44559 bytes, created 4/27/2000 3:01:00 AM
File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 6/8/2000 5:00:00 PM
File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 6/8/2000 5:00:00 PM
File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 6/8/2000 5:00:00 PM
File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 6/8/2000 5:00:00 PM
File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 6/8/2000 5:00:00 PM
File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 6/8/2000 5:00:00 PM
File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 6/8/2000 5:00:00 PM
Registry Keys:
Just when i tot it was fixed this had to happen "
Participate on our website and join the conversation
This topic is archived. New comments cannot be posted and votes cannot be cast.
Responses to this topic
Quote:
http://www.cs.uu.nl/wais/html/na-dir/cdrom/cd-recordable/part3.html
- Check your software version. You may need a newer version of the
software for correct operation with your hardware (yes, even if you
received the software with the recorder). Most, if not all,
CD recorder software publishers have web sites with updates.
- Update the software. Even if the software is new enough to be
compatible, there's some chance that your bug has already been fixed.
- Under Windows, check your ASPI layer.
- If you've tweaked your PC BIOS to the limit and are overclocking
everything, reset it to defaults and see if your problems clear up.
You can always tweak it back. If you're using a motherboard with
a VIA chipset, make sure you are running the absolute latest version
of the VIA drivers.
- Some problems with PC ATAPI drives go away when DMA is turned off for
the drive (via the Win9x device manager. You
might also need to uninstall incompatible bus-mastering drivers.
- Under Windows, rename \Windows\System\Iosubsys\scsi1hlp.vxd to
something that prevents it from being loaded ("scsi1hlp.vx_"). See
if your problems get better. scsi1hlp.vxd is only required for
compatibility with old SCSI devices.
- If you have an older recorder, and it seems to be getting progressively
worse over time, it may need to be cleaned.
Read the FAQ through. And try if those help.
http://www.cs.uu.nl/wais/html/na-dir/cdrom/cd-recordable/part3.html
- Check your software version. You may need a newer version of the
software for correct operation with your hardware (yes, even if you
received the software with the recorder). Most, if not all,
CD recorder software publishers have web sites with updates.
- Update the software. Even if the software is new enough to be
compatible, there's some chance that your bug has already been fixed.
- Under Windows, check your ASPI layer.
- If you've tweaked your PC BIOS to the limit and are overclocking
everything, reset it to defaults and see if your problems clear up.
You can always tweak it back. If you're using a motherboard with
a VIA chipset, make sure you are running the absolute latest version
of the VIA drivers.
- Some problems with PC ATAPI drives go away when DMA is turned off for
the drive (via the Win9x device manager. You
might also need to uninstall incompatible bus-mastering drivers.
- Under Windows, rename \Windows\System\Iosubsys\scsi1hlp.vxd to
something that prevents it from being loaded ("scsi1hlp.vx_"). See
if your problems get better. scsi1hlp.vxd is only required for
compatibility with old SCSI devices.
- If you have an older recorder, and it seems to be getting progressively
worse over time, it may need to be cleaned.
Read the FAQ through. And try if those help.
