see for a bios patch do i need to flash the motherboard?

ok thanks ill give it a try

excellent thanks for you help, where do u think i could get the bios update?
 
heres the full info for it:
 
 
Program: eSupport.com BIOS Agent Version 3.34
BIOS Date: 08/17/01
BIOS Type: Award Modular BIOS v6.00PG
BIOS ID: 08/17/2001-694X-686B-6A6LJM4DC
OEM Sign-On: W6321MS V5.1 081701 11:28:44
Chipset: VIA 82C691 rev 196
Superio: VIA 686 rev 64 found at port 7h
OS: WinXP SP2
CPU: PENTIUM III 1000 Mhz MAX: 1000 Mhz
BIOS ROM In Socket: Yes
BIOS ROM Size: 256K
Memory Installed: 640 MB
Memory Maximum: 512 MB
Memory Slot 01: 128 MB
Memory Slot 02: 512 MB
Memory Slot 03: 0 MB
Memory Slot 04: 0 MB

I must sound like a fool, but i cant find a driver anywhere for this, what should i be looking for (a model number of something) thanks for ur help

Go here: http://www.esupport.com/ They also have a 1 800 number if you want to speak with them.

ok thanks, ill probably need to buy the update off of esupport.com, there is just another thing, it says here on the printout: memory installed 640mb and the it says memory maximum 512mb do you think that might be the one of the problems?

On the early Intel 815 computers memory was limited to 512meg. This is a VIA setup so it is probably not limited. You have four memory banks and you have two chips in the first two. Every board will have a specification of the kind and the size for each bank. Clearly, if it has accepted the 512, it is recognizing it. On some boards in the past you had to balance the size so that you would have equal amount in each - in other words, if you had a 128 in one bank, there should be a 128 in another. Again, since your system is recognizing both memory chips, this does not seem to be a limitation for your board. Try the new BIOS first, then go from there.