Dual ISDN with Win 2K
i have 2 ISDN adapters and i want to configure them to run simultaneously on a dial-up accout. so far i can only see 2 channels in one dial-up account and is currently using only 1 channel, why can't i see the other 2 and use the other 1 or 2 channels? how do i configure them to run as, Dual ISDN? thanx erazer@hot- ...
i have 2 ISDN adapters and i want to configure them to run simultaneously on a dial-up accout. so far i can only see 2 channels in one dial-up account and is currently using only 1 channel, why can't i see the other 2 and use the other 1 or 2 channels? how do i configure them to run as, Dual ISDN?
thanx
erazer@hot-shot.com
thanx
erazer@hot-shot.com
Participate on our website and join the conversation
This topic is archived. New comments cannot be posted and votes cannot be cast.
Responses to this topic
Nice one, I rank this a five...
Number one is make sure your ISP allows full rate isdn (128K). Number two is make sure your ISP allows multiple log-ons, ie two dial-ups at the same time, (some prevent this to stop fraud etc).
To do all this you use channel bonding, or multi-link ppp as sometimes the tabs will tell you in win9x/nt.
Last time I looked at my own connections, I had my 'A' and 'B' ISDN channels, and an analog modem. Now, ignoring the fact that when I use the digital channel bonding, all the lines are being used, if I wanted to add the analog modem, I would simply tick it off in that particular ISP dial-up Networking Icon, in the list of available modems.
I can't verify this unfortunately, because I keep the server on auto-log-on as a power-user, and if I log-off to log-on as admin, I'll lode the Internet connection sharing for this PC, which is running BeOS at moment (sorry, I swore)! So the dial-up settings are locked
Back in a mo.
Number one is make sure your ISP allows full rate isdn (128K). Number two is make sure your ISP allows multiple log-ons, ie two dial-ups at the same time, (some prevent this to stop fraud etc).
To do all this you use channel bonding, or multi-link ppp as sometimes the tabs will tell you in win9x/nt.
Last time I looked at my own connections, I had my 'A' and 'B' ISDN channels, and an analog modem. Now, ignoring the fact that when I use the digital channel bonding, all the lines are being used, if I wanted to add the analog modem, I would simply tick it off in that particular ISP dial-up Networking Icon, in the list of available modems.
I can't verify this unfortunately, because I keep the server on auto-log-on as a power-user, and if I log-off to log-on as admin, I'll lode the Internet connection sharing for this PC, which is running BeOS at moment (sorry, I swore)! So the dial-up settings are locked
Back in a mo.
at the moment i have one isdn adapter, using only one B channel. that is running 64Kbps. i expect channel bundling to give me at least 112Kbps to 128Kbps. but how would i go about bundling another two B channels of my second isdn adapter on the same line? is there special software needed to carry out such an operation? ans how would i setup a single dial-up account using all 4 channels or would i have to make 2 seperate dial-up accounts?
thanx
erazer
thanx
erazer
I'm sorry, I don't get it. If I could stick another Analog modem on a line, wouldn't we all have 20 modems?
ISDN is the following:
A digital channel of 128Kbps.
You get (in the UK) two analogue sockets, and 2 digital sockets. The two analogue sockets are for voice and fax. You should not use a modem on it because it will not get the full bandwidth of a normal analogue line, it is sampled and multiplexed (queezed) into a digital 64kbps sub-channel, you will probably get around 33k max.
So in sumation 1 analogue channel uses 64k of the available 128k bandwidth. Also each digital channel uses 64K. You can have any combination of analogue and digital upto 128K.
IE two voice, both digtal (128K), or 1 voice and 1 digital (64K).
I have 1 very cheap ISDN modem ( www.haicom.com.tw) that can bond both the digital channels, I'm pretty sure most others do too.
If you have two modems, but one is using 128K digital, or both voice, or one of each, the other modem will not connect. But if all that is being used is 1 64K channel on each modem, and no voice/fax calls being made a 128K connection is possible!
If you have the full whack ISDN 2e you usually also get use of the extra 20kbps, service/control channel.
Basically you can't connect another two B-channels, just one; plus all the lines will be engaged to others.
------------------
System Spec:
Athlon 800
Gigabyte GA-7IXE F4
128Mb SSi PC100
Radeon 64Mb DDR (10/10)
Hauppauge Wintv Model 406
Realtek 8029 LAN (cnx to ISDN server)
Creative ES1371 PCI64v
Creative SBlive Value
Creative 48mx CDROM
Memorex TriMaxx200(DVD/CDR/CDRW, 6,4,24)
Maxtor 91301U3 13Gb UDMA 4
LS120
If Jungle.com say it is not in stock it'll never be in stock, so don't order it.
ISDN is the following:
A digital channel of 128Kbps.
You get (in the UK) two analogue sockets, and 2 digital sockets. The two analogue sockets are for voice and fax. You should not use a modem on it because it will not get the full bandwidth of a normal analogue line, it is sampled and multiplexed (queezed) into a digital 64kbps sub-channel, you will probably get around 33k max.
So in sumation 1 analogue channel uses 64k of the available 128k bandwidth. Also each digital channel uses 64K. You can have any combination of analogue and digital upto 128K.
IE two voice, both digtal (128K), or 1 voice and 1 digital (64K).
I have 1 very cheap ISDN modem ( www.haicom.com.tw) that can bond both the digital channels, I'm pretty sure most others do too.
If you have two modems, but one is using 128K digital, or both voice, or one of each, the other modem will not connect. But if all that is being used is 1 64K channel on each modem, and no voice/fax calls being made a 128K connection is possible!
If you have the full whack ISDN 2e you usually also get use of the extra 20kbps, service/control channel.
Basically you can't connect another two B-channels, just one; plus all the lines will be engaged to others.
------------------
System Spec:
Athlon 800
Gigabyte GA-7IXE F4
128Mb SSi PC100
Radeon 64Mb DDR (10/10)
Hauppauge Wintv Model 406
Realtek 8029 LAN (cnx to ISDN server)
Creative ES1371 PCI64v
Creative SBlive Value
Creative 48mx CDROM
Memorex TriMaxx200(DVD/CDR/CDRW, 6,4,24)
Maxtor 91301U3 13Gb UDMA 4
LS120
If Jungle.com say it is not in stock it'll never be in stock, so don't order it.
