Epox 8RDA & Asus V7100DC conflict w/capture driver
This is a discussion about Epox 8RDA & Asus V7100DC conflict w/capture driver in the Windows Hardware category; After I load the Asus Live V4. 6b driver for the video capture feature it disables the VGA video driver. I get the message in Device Manager: This device cannot find enough resources that it can use.
After I load the Asus Live V4.6b driver for the video capture feature it disables the VGA video driver.
I get the message in Device Manager:
"This device cannot find enough resources that it can use."
There are no conflicts shown in Device Manager.
Win 2k w/sp3
nForce Unified driver package V2.03
Asus V7100DC (GeForce2 MX) V31.40 drivrer
SB Live value card w/o Creative's drivers (2k only)
Linksys NIC
512MB PC2700
HP Printer
I used this card on a 8KTA with no problems! Never had this error before! There is so little in this system. About the same setup as the 8KTA had (same components).
I get the message in Device Manager:
"This device cannot find enough resources that it can use."
There are no conflicts shown in Device Manager.
Win 2k w/sp3
nForce Unified driver package V2.03
Asus V7100DC (GeForce2 MX) V31.40 drivrer
SB Live value card w/o Creative's drivers (2k only)
Linksys NIC
512MB PC2700
HP Printer
I used this card on a 8KTA with no problems! Never had this error before! There is so little in this system. About the same setup as the 8KTA had (same components).
Participate in our website and join the conversation
This subject has been archived. New comments and votes cannot be submitted.
Responses to this topic
OP
Update;
I received a e-mail reply from Asus (in spite of the fact I had to send many to get one to go through, almost as bad as their website not being W3C compatable) and they said to use the Digital VCR program/driver V2.3 along with the WDM capture driver package V1.9 which I did.
Now, I get a error message while opening the Digital VCR program:
"Can't start kennel mode driver service". The program does work though.
I have seen theis before, but when I cheked Administartive Tools/Services I could not find this "Kernel mode driver" listing. There are only a few that are disabled, the others either are auto or manual.
Any ideas?
I received a e-mail reply from Asus (in spite of the fact I had to send many to get one to go through, almost as bad as their website not being W3C compatable) and they said to use the Digital VCR program/driver V2.3 along with the WDM capture driver package V1.9 which I did.
Now, I get a error message while opening the Digital VCR program:
"Can't start kennel mode driver service". The program does work though.
I have seen theis before, but when I cheked Administartive Tools/Services I could not find this "Kernel mode driver" listing. There are only a few that are disabled, the others either are auto or manual.
Any ideas?
