half-life + win2k sp1 problem
This is a very odd problem that I can't seem to find ANY help on anywhere else. . . Before installing SP1 Half-Life / Counter-strike ran fine no problems whatsoever. . . after installing sp1 i have very very wierd problems its almost as if i lag for a few seconds but i dont actually lag.
This is a very odd problem that I can't seem to find ANY help on anywhere else... Before installing SP1 Half-Life / Counter-strike ran fine no problems whatsoever... after installing sp1 i have very very wierd problems its almost as if i lag for a few seconds but i dont actually lag. The screen pauses for a second and comes back pushing me forward... its not framerate related its related to the latency but my ping doesn't fluctuate ... If anyone knows anything about this very odd problem please give me some info about it =/ thanks
Participate on our website and join the conversation
This topic is archived. New comments cannot be posted and votes cannot be cast.
Responses to this topic
One of my boxes has a V3 3000 under Win2k with the 1.04 drivers...I think. Anyway Ive got it under SP1 with no problems.
Id really say, if you dont have any need to go to SP1, skip it. Updates do fix alot of problems, but they can also create new ones.
Heard of Wicked GL? Ive been meaning to try it, but Im lazy.
Since 3dfx really doesnt exist in the sense of putting out anything now, drivers are pretty much done with. The best alternative is a GF2 MX. Those are pretty damn fast. I like 3dfx cards, but well having support is really nice too.
It may be time to give up the V3 for your rig.
Id really say, if you dont have any need to go to SP1, skip it. Updates do fix alot of problems, but they can also create new ones.
Heard of Wicked GL? Ive been meaning to try it, but Im lazy.
Since 3dfx really doesnt exist in the sense of putting out anything now, drivers are pretty much done with. The best alternative is a GF2 MX. Those are pretty damn fast. I like 3dfx cards, but well having support is really nice too.
It may be time to give up the V3 for your rig.
I have the exact problem..
I can make some slight improvements when fooling with my antialiasing settings, as well as switching the vertical sync to "on"
unfortunately, the problem still exists in the beta of SP2 as well. This is extremely frustrating as I'm really looking forward to the speed improvements that SP2 has to offer.
Any further suggestions are greatly appreciated.
KS
I can make some slight improvements when fooling with my antialiasing settings, as well as switching the vertical sync to "on"
unfortunately, the problem still exists in the beta of SP2 as well. This is extremely frustrating as I'm really looking forward to the speed improvements that SP2 has to offer.
Any further suggestions are greatly appreciated.
KS
I use OGL in HL too, but Ive got a GF2MX. The reason I do is because in D3D when I exit a game, I cant see anything (good thing I know the keyboard shortcuts).
I tried out a Radeon 32 DDR, but the performance wasnt all that impressive.
Voodoo4~3000 in 3dmark2k, Radeon~4000, and the GF2MX with the Det. 11.01~5150+.
Some of that comes from overclocking, but the Radeon has some serious driver problems, specifically speed. No doubt the card is sweet, but DVD playback cant save it if the drivers dont do it justice.
I really wish there was a price war with video cards like the cpu price war between Intel and AMD.
I tried out a Radeon 32 DDR, but the performance wasnt all that impressive.
Voodoo4~3000 in 3dmark2k, Radeon~4000, and the GF2MX with the Det. 11.01~5150+.
Some of that comes from overclocking, but the Radeon has some serious driver problems, specifically speed. No doubt the card is sweet, but DVD playback cant save it if the drivers dont do it justice.
I really wish there was a price war with video cards like the cpu price war between Intel and AMD.
I think that this problem must be somehow hardware related. I have tried it with a clean install, and the official Detonator Drivers, with nothing else installed but SP1.
Same Problem.
However, on my office computer (win2k advanced server + SP1) the problem does not exist.
I have a K7M, TBird 800, SBlive, Diamond SCSI
Same Problem.
However, on my office computer (win2k advanced server + SP1) the problem does not exist.
I have a K7M, TBird 800, SBlive, Diamond SCSI
A couple more things...
What chipset is your mainboard?
What AGP rate do you run at? 1x2x4x?
Do you have the same problem when running halflife in D3D mode? I do, so its not a rendering problem.
What refresh rate do you run at?
Which 4 in 1 drivers do you run?
Anything else that you have noticed? I notice that 3DMark2001 does not runn correctly either.
I'm going insane.
What chipset is your mainboard?
What AGP rate do you run at? 1x2x4x?
Do you have the same problem when running halflife in D3D mode? I do, so its not a rendering problem.
What refresh rate do you run at?
Which 4 in 1 drivers do you run?
Anything else that you have noticed? I notice that 3DMark2001 does not runn correctly either.
I'm going insane.
im not even sure what chipset my mainboard is =/ it was one of those cheap motherboards that came bundeled with the cpu for a good price all i know is it is a fic 1st main board =/ i run at 4x AGP mode as far as i can tell although my bios does not allow me to change this so i can not guarantee that. yes i have the same problem in d3d i run at 60hz i use the latest ati radeon drivers. only other thing i have noticed is it is very inconsistant sometimes i can play for like 10-15 minutes without getting a spike and i think i fixed it somehow then all of a sudden there they are =/
Kritical, for the chipset, look in your manual. Even the cheapest boards will tell you what chipset it is, and a little bit more about jumpers. You do still have the manual...
Another thing, what cpu do you have.
If youre running a socket 7 board, specifically one with an ALi chipset, I suggest getting a new board and proc if you are serious about games.
The chipset is more of an issue than the mother board maker-although a good board does help.
Ive been less than impressed with ATI drivers under Win2k. The biggest bang for your buck is a GF2 MX. And Nvidia has MUCH better drivers than ATI does. The Radeon is a good card especially when it comes to DVD, but I buy a video card with gaming in mind first, and the Radeon cards dont cut it under 2k.
Kritical, please post your specs so we can help you. A doctor cant operate blindly.
Again, look at your manual.
Another thing, what cpu do you have.
If youre running a socket 7 board, specifically one with an ALi chipset, I suggest getting a new board and proc if you are serious about games.
The chipset is more of an issue than the mother board maker-although a good board does help.
Ive been less than impressed with ATI drivers under Win2k. The biggest bang for your buck is a GF2 MX. And Nvidia has MUCH better drivers than ATI does. The Radeon is a good card especially when it comes to DVD, but I buy a video card with gaming in mind first, and the Radeon cards dont cut it under 2k.
Kritical, please post your specs so we can help you. A doctor cant operate blindly.
Again, look at your manual.
Specs:
ASUS K7M
Athlon Thunderbird Slot 1 ~700MHz
ASUS Geforce DDR
256MB Micron RAM
Soundblaster Live Value
Diamond Fireport 40 SCSI (with boot drive+burner)
2 ethernet cards
USR 56K Hardware modem
Plextor 12X IDE Burner
Hitachi DVD ROM
Logitech USB Mouse
This only occurs with win2k SP1 and SP2, once you remove them, the problem is gone.
ASUS K7M
Athlon Thunderbird Slot 1 ~700MHz
ASUS Geforce DDR
256MB Micron RAM
Soundblaster Live Value
Diamond Fireport 40 SCSI (with boot drive+burner)
2 ethernet cards
USR 56K Hardware modem
Plextor 12X IDE Burner
Hitachi DVD ROM
Logitech USB Mouse
This only occurs with win2k SP1 and SP2, once you remove them, the problem is gone.
ok I have the same problem, but for me the stuttering is completely fixed by enabling V-sync. However, since installing SP1 i cant update servers- i had to manually add my normal servers:
my system
*************************
Asus P3V4x (VIA)
P3 1.008GHz
Prophet2 64 (Elsa 920 on order)
512mb 133 ram (cas3)
IBM 75GXP 30.7Gb UDMA100
SB Live
HP 8200i CDRW
x4 DVD
Windows2k SP1 & 2
my system
*************************
Asus P3V4x (VIA)
P3 1.008GHz
Prophet2 64 (Elsa 920 on order)
512mb 133 ram (cas3)
IBM 75GXP 30.7Gb UDMA100
SB Live
HP 8200i CDRW
x4 DVD
Windows2k SP1 & 2
Cipher
Additionally, I cannot run 3DMark 2001 without it messing up, and saying that I didnt run enough tests to calculate a score.
when I remove SP1, everything is fine again.
this problem still occurs when vertical sync is "on"
also, the old glquake is totally messed up with SP1, and just fine with no SP
notice the same problems?
Additionally, I cannot run 3DMark 2001 without it messing up, and saying that I didnt run enough tests to calculate a score.
when I remove SP1, everything is fine again.
this problem still occurs when vertical sync is "on"
also, the old glquake is totally messed up with SP1, and just fine with no SP
notice the same problems?
