How to get CD-Rom drive to support UDMA mode?
This is a discussion about How to get CD-Rom drive to support UDMA mode? in the Windows Hardware category; Hi, I have an Aopen CD-956E cd-rom drive attached to a CMD ATA-100 controller card as primary master but I couldn't set it to support UDMA mode, it shows as PIO mode only even though I have chosen DMA if available in the device manager and that the cd-rom does support UDMA33.
Hi,
I have an Aopen CD-956E cd-rom drive attached to a CMD ATA-100 controller card as primary master but I couldn't set it to support UDMA mode, it shows as PIO mode only even though I have chosen "DMA if available" in the device manager and that the cd-rom does support UDMA33.
Is there some changes to be made in the registry(and how?) or I should open up the PC to confirm the hardware setting like jumpers, etc.
Here's additional info on my setup:
Pentium 3, 1ghz
window XP Pro
Intel 850 mobo
2 X ATA100 HD on onboard controller, pri-master & sec-master
1 x CD-Rom Drive on CMD ATA100 controller card, pri-master
1 x CD-RW Drive on CMD ATA conroller card, sec-master
All other settings are fine and CD-Rom okay.
Any advice appreciated. Thanks.
I have an Aopen CD-956E cd-rom drive attached to a CMD ATA-100 controller card as primary master but I couldn't set it to support UDMA mode, it shows as PIO mode only even though I have chosen "DMA if available" in the device manager and that the cd-rom does support UDMA33.
Is there some changes to be made in the registry(and how?) or I should open up the PC to confirm the hardware setting like jumpers, etc.
Here's additional info on my setup:
Pentium 3, 1ghz
window XP Pro
Intel 850 mobo
2 X ATA100 HD on onboard controller, pri-master & sec-master
1 x CD-Rom Drive on CMD ATA100 controller card, pri-master
1 x CD-RW Drive on CMD ATA conroller card, sec-master
All other settings are fine and CD-Rom okay.
Any advice appreciated. Thanks.
Participate in our website and join the conversation
This subject has been archived. New comments and votes cannot be submitted.
Responses to this topic
Have you checked your BIOS or your controller card's settings?
I have this exact same CDrom dive (but no Controller card) set as secondary master on an EPoX board and it (DMA setting) works fine under Win XP and Win2000.
I have this exact same CDrom dive (but no Controller card) set as secondary master on an EPoX board and it (DMA setting) works fine under Win XP and Win2000.
my cdrom is the master on the 2-nd chanel (i815) and this:
Code:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96A-E325-11CE-BFC1-08002BE10318}\0002]
"InfPath"="mshdc.inf"
"InfSection"="atapi_Inst_secondary"
"ProviderName"="Microsoft"
"DriverDateData"=hex:00,80,62,c5,c0,01,c1,01
"DriverDate"="7-1-2001"
"DriverVersion"="5.1.2600.0"
"MatchingDeviceId"="secondary_ide_channel"
"DriverDesc"="Secondary IDE Channel"
"MasterDeviceType"=dword:00000002
"SlaveDeviceType"=dword:00000000
"MasterDeviceTimingMode"=dword:00002010
"MasterIdDataCheckSum"=dword:000147d6
"SlaveDeviceTimingMode"=dword:00000000
"SlaveDeviceDetectionTimeout"=dword:00000001
"EnumPropPages32"="storprop.dll,IdePropPageProvider"
"MasterDeviceTimingModeAllowed"=dword:ffffffff
"UserMasterDeviceTimingModeAllowed"=dword:ffffffff
"UserSlaveDeviceType"=dword:00000003
works
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96A-E325-11CE-BFC1-08002BE10318}\0002]
"InfPath"="mshdc.inf"
"InfSection"="atapi_Inst_secondary"
"ProviderName"="Microsoft"
"DriverDateData"=hex:00,80,62,c5,c0,01,c1,01
"DriverDate"="7-1-2001"
"DriverVersion"="5.1.2600.0"
"MatchingDeviceId"="secondary_ide_channel"
"DriverDesc"="Secondary IDE Channel"
"MasterDeviceType"=dword:00000002
"SlaveDeviceType"=dword:00000000
"MasterDeviceTimingMode"=dword:00002010
"MasterIdDataCheckSum"=dword:000147d6
"SlaveDeviceTimingMode"=dword:00000000
"SlaveDeviceDetectionTimeout"=dword:00000001
"EnumPropPages32"="storprop.dll,IdePropPageProvider"
"MasterDeviceTimingModeAllowed"=dword:ffffffff
"UserMasterDeviceTimingModeAllowed"=dword:ffffffff
"UserSlaveDeviceType"=dword:00000003
works
OP
Hi Ralf an Bottleneck,
Thanks for the advice.
Will try both hardware and registry to see if it will work.
Get back to you guys if it doesn't. Thanks.
Thanks for the advice.
Will try both hardware and registry to see if it will work.
Get back to you guys if it doesn't. Thanks.
Quote:
Hi Ralf an Bottleneck,
Thanks for the advice.
Will try both hardware and registry to see if it will work.
Get back to you guys if it doesn't. Thanks.
You have to look at your bios, whether it recognizes your CD-ROM as PIO 4 or UDMA 33. In the first case, it may possible, that you have only PIO 4 or DMA Multiword 2. In the second normally XP activates DMA automatically.
Hi Ralf an Bottleneck,
Thanks for the advice.
Will try both hardware and registry to see if it will work.
Get back to you guys if it doesn't. Thanks.
You have to look at your bios, whether it recognizes your CD-ROM as PIO 4 or UDMA 33. In the first case, it may possible, that you have only PIO 4 or DMA Multiword 2. In the second normally XP activates DMA automatically.
