I have a DVD Drive problem hopefully someone can help me wit
Hi i have a ?. I just recently upgraded to windows XP and i love it beings i come from windows 98. Anyways after i upgraded my burner drive would work but not my dvd drive, my dvd drive is an Aopen 1640-Pro.
Hi i have a ?. I just recently upgraded to windows XP and i love it beings i come from windows 98. Anyways after i upgraded my burner drive would work but not my dvd drive, my dvd drive is an Aopen 1640-Pro. I love computers and im just starting to work on them and i was wondering if u all could help me out with this problem. Now when i put a cd in it reads it and tells me like diablexpansion but it will not autorun anything and when i double click the drive it gives me this error "Only part of a ReadProcessMemory or WriteProcessMemory request was compleated." My friend who helped me upgrade told me that my DVD drive might not be compatible or it might be a driver issue. I have looked for 2 days for a driver that says for xp and i cant find one and when i try to install other drivers it uses a driver that came with xp. So i guess what im trying to say is that im lost and that i hope someone else has had or knows what to do about it cause im pulling my hair out over this lol. Any help would be appreciated thanks.
Bondfreak007
Bondfreak007
Participate on our website and join the conversation
This topic is archived. New comments cannot be posted and votes cannot be cast.
Responses to this topic
According to this website it should work with XP.
http://www.viperlair.com/reviews/mem_store/other/optical/aopen1640.shtml
Have you tried up[censored] the firmware?
http://download.aopen.com.tw/downloads/d...tionfun=typefun
Did you do a fresh install or upgrade over Windows 98?
http://www.viperlair.com/reviews/mem_store/other/optical/aopen1640.shtml
Have you tried up[censored] the firmware?
http://download.aopen.com.tw/downloads/d...tionfun=typefun
Did you do a fresh install or upgrade over Windows 98?
i did a fresh install
Have you tried another DVD-ROM to see if it's the drive?
and another tip just in case, some of the drives now have UDMA supported modes. Have you actually tried replacing the cable with say an 80-pin one or just another new UDMA33 cable ?!?
Also make sure your device drivers for the onboard IDE are up to date. If you have a Via chipset, make sure the latest 4in1 service pack is installed, should be v4.49 now. If it's an Intel chipset, check their site for the latest inf device drivers and the latest IAA drivers.
Also make sure your device drivers for the onboard IDE are up to date. If you have a Via chipset, make sure the latest 4in1 service pack is installed, should be v4.49 now. If it's an Intel chipset, check their site for the latest inf device drivers and the latest IAA drivers.
the only thing i cant figure out is it reads the cd it just doesnt let me play it off that drive. When i put in diablo expansion the dvd shows that expansion is in it but it wont play it it gives me that error that i stated in the first post and i cant figure out what it means.
The only other thing I can think of is a dirty lens on the DVD reader. Perhaps getting a can of compressed air and opening the drive unit for a blow out my help. Also perhaps a slight mis-alignment of said lens, not sure at this point but since the pricing on readers is pretty cheap now a days, perhaps a drive replacement is in order
You could also check with the manufacturer to see if it's still under warranty and have them take a look at too.
You could also check with the manufacturer to see if it's still under warranty and have them take a look at too.
thanks if i cant get it working here pretty quick i will buy a new one but i would like to thank all of u that posted for the help i tried all the things u guys told me to and i would like to thank u again
Do you have SP1a installed?
I have no idea what one of these is and I'm grasping at anything at this point but do you have a Windows Powered Smart Display?
http://support.microsoft.com/default.aspx?scid=kb;en-us;810288
Are there any entries in the Event Viewer after you try to access the drive?
Everything else points to memory. Possibly the memory cache on the drive has gone bad.
I'd go with jmmijo's suggestion of just getting a new drive. If I tried to fix all the CDROM drive problems I've had over the years I would still be troubleshooting them! Unfortunately, with these drives so cheap, they are basically disposable now a days.
I have no idea what one of these is and I'm grasping at anything at this point but do you have a Windows Powered Smart Display?
http://support.microsoft.com/default.aspx?scid=kb;en-us;810288
Are there any entries in the Event Viewer after you try to access the drive?
Everything else points to memory. Possibly the memory cache on the drive has gone bad.
I'd go with jmmijo's suggestion of just getting a new drive. If I tried to fix all the CDROM drive problems I've had over the years I would still be troubleshooting them! Unfortunately, with these drives so cheap, they are basically disposable now a days.
I know this is an old thread, but new members may have this problem and stumble across this.
To fix this problem when you get the error message mentioned earlier do this;
Open device manager and open IDE ATA/ATAPI controllers
Open the properties of the secondary IDE channel and click on the Advanced Settings tab.
Change the transfer mode to PIO Only.
To fix this problem when you get the error message mentioned earlier do this;
Open device manager and open IDE ATA/ATAPI controllers
Open the properties of the secondary IDE channel and click on the Advanced Settings tab.
Change the transfer mode to PIO Only.
