I need some advise.

This is a discussion about I need some advise. in the Windows Hardware category; First off I know that this really isn't the right forum for this but I know you guys know your stuff and I wanted your opinion. I have a 1. 4 t-bird w/SK-6 heatsink right now with a delta on it. It is running at about 114 with no case fan.

Windows Hardware 9627 This topic was started by ,


data/avatar/default/avatar38.webp

125 Posts
Location -
Joined 2001-01-17
First off I know that this really isn't the right forum for this but I know you guys know your stuff and I wanted your opinion.
I have a 1.4 t-bird w/SK-6 heatsink right now with a delta on it. It is running at about 114 with no case fan. I was looking into getting an adapter for the SK-6 but all of the reviews I have read have said that it is a waste of money.
I would like to know what people are running on their SK-6's. I am just looking to get the noise down.
I'm not going to overclock so droping the temp is not a big deal. I think that the exaust fan im going to add in the back will help with droping the heat a bit anyway.
So I just want to know what fans are being used on the SK-6 and what the temps are to go along with them.

Participate in our website and join the conversation

You already have an account on our website? To log in, use the link provided below.
Login
Create a new user account. Registration is free and takes only a few seconds.
Register
This subject has been archived. New comments and votes cannot be submitted.
Oct 10
Created
Oct 11
Last Response
0
Likes
2 minutes
Read Time
User User User User
Users

Responses to this topic


data/avatar/default/avatar33.webp

723 Posts
Location -
Joined 2000-02-05
I hope 114 is in Fahrenheit, cos otherwise your $hit would melt, lol.
What's 114 in Celsius, btw?

data/avatar/default/avatar19.webp

690 Posts
Location -
Joined 2000-05-21
45.56 degrees Celsius
318.61 Kelvin

data/avatar/default/avatar31.webp

1015 Posts
Location -
Joined 2001-06-29
I had a delta 60mm on my SK6 with an athlon 1.4@1.575 and the temps reched about 43degrees C under full load, but i do have quiet a lot of case fans which helped alot.
 
I also tried an 80mm delta on it but it wasnt as good as the 60mm. For quietness there are a few fans you can try, i like the YStech ones as the push a decent amount of air and are nothing like a delta noise wise (thank god).
 
Here are the stats for the fans
 
Delta 60mm
Output - 37.6CFM
Decibels - 46.5dBA
 
YSTech 60mm
Output - 26CFM
Decibels - 36dBA
 
Obviously temps would be higher but it shouldnt be that much if you get an exaust fan to go with it I would say probably about 50degrees C with that fan. Damn those 1.4s just put out too much heat!
 
Hope this helps you a bit.