IDE drive listed as SCSI drive, can't access
System info: Abit SA6R Intel PIII 933 Crucial 256Mb Adaptec 2940UW (3) 4. 5G Seagate Cheetahs (1) WD 15. 0G IDE on HPt 370 Plextor 14/32 SCSI CDROM Plextor 12/10/32A CDRW Asus V7700 Deluxe SB Live! I'm running a dual boot system, FAT32 all drives, with Windows98SE on Cheetah #1, Windows XP Pro on Cheetah #2, other ...
System info:
Abit SA6R
Intel PIII 933
Crucial 256Mb
Adaptec 2940UW
(3) 4.5G Seagate Cheetahs
(1) WD 15.0G IDE on HPt 370
Plextor 14/32 SCSI CDROM
Plextor 12/10/32A CDRW
Asus V7700 Deluxe
SB Live!
I'm running a dual boot system, FAT32 all drives, with Windows98SE on Cheetah #1, Windows XP Pro on Cheetah #2, other 2 drives being empty.
The 15G WD is recognized and usable in 98SE, but is listed in the Device Manager in XP as a WDC 15G SCSI drive (I'm assuming because it is connected to the HPT 370 RAID controller) however the drive is not accessible.
It is the only IDE disk drive in my system. HPT drivers were automatically installed successfully during the XP install, no hardware conflicts listed in the device manager, as well as all devices enabled.
I have not removed the IDE drive from the ATA100 channel and tried the other IDE channels, it has worked perfectly in this config running 98SE since I installed it.
Thanks in advance for any tips,
Johnrock
Abit SA6R
Intel PIII 933
Crucial 256Mb
Adaptec 2940UW
(3) 4.5G Seagate Cheetahs
(1) WD 15.0G IDE on HPt 370
Plextor 14/32 SCSI CDROM
Plextor 12/10/32A CDRW
Asus V7700 Deluxe
SB Live!
I'm running a dual boot system, FAT32 all drives, with Windows98SE on Cheetah #1, Windows XP Pro on Cheetah #2, other 2 drives being empty.
The 15G WD is recognized and usable in 98SE, but is listed in the Device Manager in XP as a WDC 15G SCSI drive (I'm assuming because it is connected to the HPT 370 RAID controller) however the drive is not accessible.
It is the only IDE disk drive in my system. HPT drivers were automatically installed successfully during the XP install, no hardware conflicts listed in the device manager, as well as all devices enabled.
I have not removed the IDE drive from the ATA100 channel and tried the other IDE channels, it has worked perfectly in this config running 98SE since I installed it.
Thanks in advance for any tips,
Johnrock
Participate on our website and join the conversation
This topic is archived. New comments cannot be posted and votes cannot be cast.