Installed Audigy Platinum, but gosh the front drive does not

This is a discussion about Installed Audigy Platinum, but gosh the front drive does not in the Windows Hardware category; I installed the drive bay with the cables hooked up properly, and then popped in the sound card hooking up the cables from ther drive bay to it. Of course, before installing the card and bay, I removed all traces of my previous sound card.

Windows Hardware 9627 This topic was started by ,


data/avatar/default/avatar22.webp

7 Posts
Location -
Joined 2000-02-23
I installed the drive bay with the cables hooked up properly, and then popped in the sound card hooking up the cables from ther drive bay to it. Of course, before installing the card and bay, I removed all traces of my previous sound card.
 
So, I rebooted, Windows XP Pro detects the new sound card, and I cancel out of the installation, instead installing from the CD. Everything installs properly, I reboot and then install the Audigy upgrade and reboot again.
 
Sound works properly, but the remote center doesn't, and neither does anything on the front drive bay. Specifically, I tested the headphone output and no go.
 
Any ideas gladly accepted.
 
thanks
 
Tom

Participate in our website and join the conversation

You already have an account on our website? To log in, use the link provided below.
Login
Create a new user account. Registration is free and takes only a few seconds.
Register
This subject has been archived. New comments and votes cannot be submitted.
Dec 30
Created
Dec 30
Last Response
0
Likes
2 minutes
Read Time
User User
Users

Responses to this topic


data/avatar/default/avatar03.webp

379 Posts
Location -
Joined 2000-09-09
Check the hints and graphics from the Creative knowledgebase:
 
"Solution ID: 10003: How do I install the Sound Blaster Audigy Platinum eX hardware and software?"
 
http://dmzweb3.europe.creative.com/SRVS/...,Case=obj(1003)
 
EDITED BY clutch (just fixing the link, you will have to copy-and-paste because of its structure).

data/avatar/default/avatar22.webp

7 Posts
Location -
Joined 2000-02-23
OP
I have the Platinum, and not the Platinum EX, but I follled the installation instructiuons for the platinum exactly as dexcribed under that knowledge base answer. For the hec of it, I removed my drive and card, and then reinstalled them, noting whether the drive bay would ever work at any stage of driver instakllation (it didn't). Back to the store for another copy tomorrow.
 
Thanks for the pointers. They are much appreciated.
 
Tom