Mustek 600 II CD Scanner - Windows 2000 Drivers
has anyone seen Windows 2000 drivers for the Mustek 600 II CD Scanner? Do the NT4 drivers work under 2000? I did find the following article on this site about using a generic DTC-3181 SCSI driver, but the link is broken.
has anyone seen Windows 2000 drivers for the Mustek 600 II CD Scanner?
Do the NT4 drivers work under 2000?
I did find the following article on this site about using a generic DTC-3181 SCSI driver, but the link is broken.
Any help on this would also be greatly appreciated!
-----------------------------
Saturday, October 30, 1999
SCSI Scanners under Windows 2000
Julian Mehnle send me the follow:
"I saw that you posted the Mustek 600 II CD as not working under Win2000. According to the Mustek web site, the scanner uses the DTC-3181 SCSI card:
http://www.mustek.com/Imaging/drivers/devicedrivers/600iicd.htm
As I don't have that scanner (only the SCSI card with another scanner), I can't tell for sure, but I guess if you use the DTC-3181 Win2k drivers ( http://www.ntcompatible.com/files/dtc3x8x-win2k.zip) supplied by me, the scanner should be working (if you install the TWAIN drivers of course).
The DTC-3181 is often bundled with SCSI scanners. It is built upon the Domex 436 chip. The 3181/3151/3x8x can all use the same drivers. The card doesn't use an IRQ, only direct I/O, and therefore is very slow and causes 100% CPU load during use, even under NT4/W2000 (and I *mean* 100%!!). But it does work.
The delayed Win2k bootup is normal with these drivers, and other scanners do work fine with them!"
Do the NT4 drivers work under 2000?
I did find the following article on this site about using a generic DTC-3181 SCSI driver, but the link is broken.
Any help on this would also be greatly appreciated!
-----------------------------
Saturday, October 30, 1999
SCSI Scanners under Windows 2000
Julian Mehnle send me the follow:
"I saw that you posted the Mustek 600 II CD as not working under Win2000. According to the Mustek web site, the scanner uses the DTC-3181 SCSI card:
http://www.mustek.com/Imaging/drivers/devicedrivers/600iicd.htm
As I don't have that scanner (only the SCSI card with another scanner), I can't tell for sure, but I guess if you use the DTC-3181 Win2k drivers ( http://www.ntcompatible.com/files/dtc3x8x-win2k.zip) supplied by me, the scanner should be working (if you install the TWAIN drivers of course).
The DTC-3181 is often bundled with SCSI scanners. It is built upon the Domex 436 chip. The 3181/3151/3x8x can all use the same drivers. The card doesn't use an IRQ, only direct I/O, and therefore is very slow and causes 100% CPU load during use, even under NT4/W2000 (and I *mean* 100%!!). But it does work.
The delayed Win2k bootup is normal with these drivers, and other scanners do work fine with them!"
Participate on our website and join the conversation
This topic is archived. New comments cannot be posted and votes cannot be cast.
Responses to this topic
Hello!
Well, I just surfed through all the Mustek-Driver-sites again, just to see if my hope wasn't useless at all. Then I found this: http://www.mustek-driver.de/600_2cd.html
As you can see a driver for the Mustek 600 II CD, working under Win2k, is planned now. Please, don't ask when they're going to be realeased...
For me, there's just a new hope...
cya
Well, I just surfed through all the Mustek-Driver-sites again, just to see if my hope wasn't useless at all. Then I found this: http://www.mustek-driver.de/600_2cd.html
As you can see a driver for the Mustek 600 II CD, working under Win2k, is planned now. Please, don't ask when they're going to be realeased...
For me, there's just a new hope...
cya
IMO that is still not an excuse for them not to have drivers for it, i mean people use this for business too and to not have drivers after an OS has been out for a year and already has a service pack for it is just plain crap. You should put a petition together of all the people that want drivers developed faster than just being 'planned on' and send it to them and see if they respond. If not i would just tell everyone to tell everyone they know not to buy their products.
/end rant
/end rant
Of course it's not an excuse at all - thats clear! But it's better than the last answer to my email when I asked when they will realease a driver for Win2k. You know what they wrote? "Win2k is a operating system for the professional user, but our scanner Mustek 600 II CD is hardware for home user only - so we won't develop any software for Win2k!"
It's clear to me that I won't ever buy a Mustek product again - but nevertheless I'm so happy that it seems as if I could use my scanner in Win2k too that I don't care very much that there's so much delay - because, in my case, the consequences to give a **** on their products are already there...
It's clear to me that I won't ever buy a Mustek product again - but nevertheless I'm so happy that it seems as if I could use my scanner in Win2k too that I don't care very much that there's so much delay - because, in my case, the consequences to give a **** on their products are already there...
