O.K...o.K..Does Gilde, D3D and OpenGL work with Voodoo5 in O
I'm confused, I see all these posts saying it will work or it wont work. . . Has anyone actually gotten Glide, D3D and OpenGL to work with their Voodoo5 5500 under the final build of XP (2600)? If so, where can I get information of getting it to work? Please only persons who own a Voodoo5 and are using the latest X ...
I'm confused, I see all these posts saying it will work or it wont work...
Has anyone actually gotten Glide, D3D and OpenGL to work with their Voodoo5 5500 under the final build of XP (2600)?
If so, where can I get information of getting it to work?
Please only persons who own a Voodoo5 and are using the latest XP build post, since there seems to be way to much misinformation floating around here.
Has anyone actually gotten Glide, D3D and OpenGL to work with their Voodoo5 5500 under the final build of XP (2600)?
If so, where can I get information of getting it to work?
Please only persons who own a Voodoo5 and are using the latest XP build post, since there seems to be way to much misinformation floating around here.
Participate on our website and join the conversation
This topic is archived. New comments cannot be posted and votes cannot be cast.
Responses to this topic
Andy_7676 I own Voodoo5 5500 belive me win I say there no way to get Glide nor OpenGL to work under WinXP but you can get better DirectX support then the build in drv that come with WinXP all you need is 3dfx Voodoo4/5 Win2K 1.04 drivers kit, I'am not done with the DirectX only drv for WinXP hope I have them done before I go out town this week but I would count it being I have all ready dump WinXP and ton of other stuff to make room for captuering 2 or 3week of Babylon 5 wail I'am out of town.
If want the WinXP DirectX only drv rigth now e-mail me.
If want the WinXP DirectX only drv rigth now e-mail me.
SHS
yes you are right,
i have tried different (suposedly working xp drivers) drivers for my v3 and xpPRO 2600, all they did is whack my system, and had to use system restore! DAMM GOOD THING THEY INCORPORATED THAT FEATURE! to get my system back to normal,
i have found that the only half decent drivers for my v3 are:
OFFICIAL LAST RELEASE OF WIN2K DRIVERS DATED NOV2000
that set works, for the most part,
i have no 3dfx tools
i can get D3D games to work,
NO glide works
NO opengl games work
but all my kids 2d games and some (havn't gone through my game collection yet) D3D games are ok,
UT in glide is software only, and windowed, however when i select D3D UT plays really well in winXPpro nice and smooth,
one other is PROJECT IGI that game runs ok, but there is some bad texture placements,
RED FACTION works ok too, but there is also some bad graphics,
MECHwarrior4 works ok, IN GAME, but the MENUE screens are all FUBAR'D
i am afraid that winXP and 3dfx cards are going to be a nono now!
win2k and my v3 are wicked with the last official release of the 3dfx drivers for DX8, and am using thoes for my XP box now with the v3
2d is flawless as usual,
but when i tried glide option and opengl option, i get some memory errors or some fial to load..... errors....
SSAM doesn't work, flat out at all...
bottom line,
3dfx drivers rock in win98se and win2k but are very poor in winXP
yes you are right,
i have tried different (suposedly working xp drivers) drivers for my v3 and xpPRO 2600, all they did is whack my system, and had to use system restore! DAMM GOOD THING THEY INCORPORATED THAT FEATURE! to get my system back to normal,
i have found that the only half decent drivers for my v3 are:
OFFICIAL LAST RELEASE OF WIN2K DRIVERS DATED NOV2000
that set works, for the most part,
i have no 3dfx tools
i can get D3D games to work,
NO glide works
NO opengl games work
but all my kids 2d games and some (havn't gone through my game collection yet) D3D games are ok,
UT in glide is software only, and windowed, however when i select D3D UT plays really well in winXPpro nice and smooth,
one other is PROJECT IGI that game runs ok, but there is some bad texture placements,
RED FACTION works ok too, but there is also some bad graphics,
MECHwarrior4 works ok, IN GAME, but the MENUE screens are all FUBAR'D
i am afraid that winXP and 3dfx cards are going to be a nono now!
win2k and my v3 are wicked with the last official release of the 3dfx drivers for DX8, and am using thoes for my XP box now with the v3
2d is flawless as usual,
but when i tried glide option and opengl option, i get some memory errors or some fial to load..... errors....
SSAM doesn't work, flat out at all...
bottom line,
3dfx drivers rock in win98se and win2k but are very poor in winXP
http://www.pbbg09989.pwp.blueyonder...vx-wxp-1.01.exe
I EAT MY WORDS!
i just picked these up from further down in this forum, and thoes WORK!
duno about the v4 or v5, but they work on my v3!!!!!!!
wow wow wow, i got UT goind in glide, and ssam in opengl and q3 working,
in other words, d3d opengl and glide, seem SEEM to be working fine now
i am running a v3 2000 agp with a p3v4x and a 550E oc'd to 733 128 ram and WIN XP PRO 2600
the games are playing as good or pretty close to win2k gaming with the v3!
i suggest you 3dfx v3/4/5 owners give thoes a try,
they work for me i burned them to a cd!
I EAT MY WORDS!
i just picked these up from further down in this forum, and thoes WORK!
duno about the v4 or v5, but they work on my v3!!!!!!!
wow wow wow, i got UT goind in glide, and ssam in opengl and q3 working,
in other words, d3d opengl and glide, seem SEEM to be working fine now
i am running a v3 2000 agp with a p3v4x and a 550E oc'd to 733 128 ram and WIN XP PRO 2600
the games are playing as good or pretty close to win2k gaming with the v3!
i suggest you 3dfx v3/4/5 owners give thoes a try,
they work for me i burned them to a cd!
An alternative method (that worked for me, at least) is to install the 1.04.00 Win2K drivers from http;//www.3dfx.com
Upon installing the drivers, you will get four error messages about an inability to register some components. Simply reboot XP and re-install the driver package again. You won't get any error messages this time around and - to date - the Win2K drivers seem to work just fine.
Hope this helps ya..
Upon installing the drivers, you will get four error messages about an inability to register some components. Simply reboot XP and re-install the driver package again. You won't get any error messages this time around and - to date - the Win2K drivers seem to work just fine.
Hope this helps ya..
I went through this search last week and came up empty handed. When I looked, there were no 100% working WinXP drivers, though they are expected soon from x3dfx-c. I did find better drivers for Win2k though! I'll post the link tonight if you're interested though, it was nearly impossible for me to find the site a second time.
