Probs after re-image :(
This is a discussion about Probs after re-image :( in the Windows Software category; I re-imaged my machine. I had to add to the image because my IBM scsi drive was not showing, so I added the HPT 366 125 drivers and everything was AOK. . . . for 20 minutes then my pc just rebooted itself.
I re-imaged my machine.
I had to add to the image because my IBM scsi drive was not showing, so I added the HPT 366 125 drivers and everything was AOK....for 20 minutes then my pc just rebooted itself. Anyway I carried on, seemed ok, then it rebooted itself after 1.5 hours while I was online gaming. It came back up, and I left some dls coming down overnight.
Camw to it this morning and was presented with a blue screen > IRQ_NOT_LESS_OR_EQUAL.
Checked my event viewer and have 2 oddities.
I wonder if you could shed some light please.
Application Log >
Event Type: Error
Event Source: perfctrs
Event Category: None
Event ID: 3101
Date: 29/12/2000
Time: 11:51:45
User: N/A
Computer: ******
Description:
Unable to read IO control information from NBT device.
-------------
System Log from last night (earlier this morning) >
Event Type: Warning
Event Source: Disk
Event Category: None
Event ID: 51
Date: 29/12/2000
Time: 01:07:56
User: N/A
Computer: ******
Description:
An error was detected on device \Device\Harddisk2\DR2 during a paging operation.
Data:
0000: 04 03 22 00 01 00 72 00 .."...r.
0008: 00 00 00 00 33 00 04 80 ....3..€
0010: 2d 01 00 00 00 00 00 00 -.......
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 68 90 01 01 00 00 00 .h?.....
0028: 00 00 00 00 01 00 00 00 ........
0030: 00 00 00 00 2a 00 00 00 ....*...
0038: 02 82 00 00 00 00 0b 00 .‚......
0040: 2a 00 00 80 c8 34 00 00 *..€È4..
0048: 80 00 €.
-------------------
Event Type: Warning
Event Source: Hpt366
Event Category: None
Event ID: 26
Date: 29/12/2000
Time: 01:07:56
User: N/A
Computer: *******
Description:
The driver has detected that device \Device\Scsi\Hpt3661 has old or out-of-date firmware. Reduced performance may result.
Data:
0000: 0f 00 10 00 01 00 66 00 ......f.
0008: 00 00 00 00 1a 00 04 80 .......€
0010: 04 00 00 00 00 00 00 00 ........
0018: 03 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
0028: 00 00 00 00 01 00 00 00 ........
0030: 00 00 00 00 09 00 00 00 ........
------------------
I have the latest HPT drivers, and I didn't get this b4 the reimage.
Any help would be grateful, b4 I do the whole INSTAL instead of IMAGE
Cheers
Yak
--
[ December 29, 2000: Message edited by: yakkob ]
I had to add to the image because my IBM scsi drive was not showing, so I added the HPT 366 125 drivers and everything was AOK....for 20 minutes then my pc just rebooted itself. Anyway I carried on, seemed ok, then it rebooted itself after 1.5 hours while I was online gaming. It came back up, and I left some dls coming down overnight.
Camw to it this morning and was presented with a blue screen > IRQ_NOT_LESS_OR_EQUAL.
Checked my event viewer and have 2 oddities.
I wonder if you could shed some light please.
Application Log >
Event Type: Error
Event Source: perfctrs
Event Category: None
Event ID: 3101
Date: 29/12/2000
Time: 11:51:45
User: N/A
Computer: ******
Description:
Unable to read IO control information from NBT device.
-------------
System Log from last night (earlier this morning) >
Event Type: Warning
Event Source: Disk
Event Category: None
Event ID: 51
Date: 29/12/2000
Time: 01:07:56
User: N/A
Computer: ******
Description:
An error was detected on device \Device\Harddisk2\DR2 during a paging operation.
Data:
0000: 04 03 22 00 01 00 72 00 .."...r.
0008: 00 00 00 00 33 00 04 80 ....3..€
0010: 2d 01 00 00 00 00 00 00 -.......
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 68 90 01 01 00 00 00 .h?.....
0028: 00 00 00 00 01 00 00 00 ........
0030: 00 00 00 00 2a 00 00 00 ....*...
0038: 02 82 00 00 00 00 0b 00 .‚......
0040: 2a 00 00 80 c8 34 00 00 *..€È4..
0048: 80 00 €.
-------------------
Event Type: Warning
Event Source: Hpt366
Event Category: None
Event ID: 26
Date: 29/12/2000
Time: 01:07:56
User: N/A
Computer: *******
Description:
The driver has detected that device \Device\Scsi\Hpt3661 has old or out-of-date firmware. Reduced performance may result.
Data:
0000: 0f 00 10 00 01 00 66 00 ......f.
0008: 00 00 00 00 1a 00 04 80 .......€
0010: 04 00 00 00 00 00 00 00 ........
0018: 03 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
0028: 00 00 00 00 01 00 00 00 ........
0030: 00 00 00 00 09 00 00 00 ........
------------------
I have the latest HPT drivers, and I didn't get this b4 the reimage.
Any help would be grateful, b4 I do the whole INSTAL instead of IMAGE
Cheers
Yak
--
[ December 29, 2000: Message edited by: yakkob ]
Participate in our website and join the conversation
This subject has been archived. New comments and votes cannot be submitted.
Dec 29
Dec 30
0
3 minutes
Responses to this topic
OP
Okie dokie,
PC hasn't turned itself off all day
*Ahem* @ stoopid ole me directing my new heater at my tootsies to keep them warm, and they happen to be near the intake fan of my case.
Doh!
Used speeddisk on The pagefile error HD, and that seems to be ok. I think that was caused by that over-heating too (ATA-100's run hot anyways without fan heaters to help them along)
So that just leaves one error,
Does anyone know what this means?
Should I be worried by it?
(I don't know if I had this b4 the reimage either which is a bugger).
Application Log >
Event Type: Error
Event Source: perfctrs
Event Category: None
Event ID: 3101
Date: 29/12/2000
Time: 11:51:45
User: N/A
Computer: ******
Description:
Unable to read IO control information from NBT device.
This is the only error in the app log everytime I boot up.
Cheers and Happy New Year
(Think I have nearly bust my finger whilst sledging about 30 mins ago, and it hurts like hell!)
Yak
--
PC hasn't turned itself off all day
*Ahem* @ stoopid ole me directing my new heater at my tootsies to keep them warm, and they happen to be near the intake fan of my case.
Doh!
Used speeddisk on The pagefile error HD, and that seems to be ok. I think that was caused by that over-heating too (ATA-100's run hot anyways without fan heaters to help them along)
So that just leaves one error,
Does anyone know what this means?
Should I be worried by it?
(I don't know if I had this b4 the reimage either which is a bugger).
Application Log >
Event Type: Error
Event Source: perfctrs
Event Category: None
Event ID: 3101
Date: 29/12/2000
Time: 11:51:45
User: N/A
Computer: ******
Description:
Unable to read IO control information from NBT device.
This is the only error in the app log everytime I boot up.
Cheers and Happy New Year
(Think I have nearly bust my finger whilst sledging about 30 mins ago, and it hurts like hell!)
Yak
--
