USB 2/Devices: How good are they?
Hi. After having my main PC in my room for quite awhile and putting up with the noise it generates, I had a thought about shoving it in another room and replacing all the devices that need access (CD, CD-RW, DVD, floppy) to USB ones and running a really long cable to my room where a USB hub would be.
Hi.
After having my main PC in my room for quite awhile and putting up with the noise it generates, I had a thought about shoving it in another room and replacing all the devices that need access (CD, CD-RW, DVD, floppy) to USB ones and running a really long cable to my room where a USB hub would be.
The devices I'm thinking of powering from it would consist of a KB, mouse, SB Extidy, CD, CD-RW, DVD, floppy drive, scanner and maybe a printer.
Now thats quite a lot. My question, is how long can a USB cable be? and would running all this off it (USB2 btw) be feasible?
Does anyone do anything like this?
I really hate the idea of anything USB... but the idea seemed like a nice solution.
After having my main PC in my room for quite awhile and putting up with the noise it generates, I had a thought about shoving it in another room and replacing all the devices that need access (CD, CD-RW, DVD, floppy) to USB ones and running a really long cable to my room where a USB hub would be.
The devices I'm thinking of powering from it would consist of a KB, mouse, SB Extidy, CD, CD-RW, DVD, floppy drive, scanner and maybe a printer.
Now thats quite a lot. My question, is how long can a USB cable be? and would running all this off it (USB2 btw) be feasible?
Does anyone do anything like this?
I really hate the idea of anything USB... but the idea seemed like a nice solution.
Participate on our website and join the conversation
This topic is archived. New comments cannot be posted and votes cannot be cast.
Responses to this topic
USB does have greater power but the distances you are looking at are unrealistic. Also all of those devices being USB would cause MAJOR interference. You may think that USB 2 pipe is HUGE but realistically it is not....not even close. Processor requirements and latency in all of those bandwidth devices fighting each other over that puny little USB connection would be HELL.
Look at water cooling if your so worried over the noice. I find it comforting.
Look at water cooling if your so worried over the noice. I find it comforting.
Maximum distance for an unpowered USB Cable is about 5mt's. Beyonf that too much interference. You can extend it with using powered hubs every five meters but.... Bandwith for all the devices you are talking about is out of the question there is just so much of it and they are a bit greedy (devices) about it.
However if the cost was not an issue, There is something called USBX from a UK company. It works as transmitter/receiver you plug your USB devices on the transmitter (client, where you want them) and plug the main station(s) on your PC, and run a Cat5e cable in between. Neat! Works great a bit pricey though. I used them for tight client CCTV solution
I do not have their address handy, but i will look for it and post it here.
However if the cost was not an issue, There is something called USBX from a UK company. It works as transmitter/receiver you plug your USB devices on the transmitter (client, where you want them) and plug the main station(s) on your PC, and run a Cat5e cable in between. Neat! Works great a bit pricey though. I used them for tight client CCTV solution
I do not have their address handy, but i will look for it and post it here.
I like my PS/2 ports.
Even if you could get all your USB devices working as you wanted (despite bandwidth limitations), how would you get a cable sufficiently long for the monitor? Even if you could get one, it probably wouldn't work for more than a couple of metres.
