W2K runs really slowly
I just installed W2K Pro (pristine install) and now the machine is almost unusably slow. As I write this, I'm about five letters ahead of what I see, and I'm not *that* fast of a typist. I try to play a fullscreen mpeg at 1600x1200 and I get about 1 frame/sec.
I just installed W2K Pro (pristine install) and now the machine is almost unusably slow. As I write this, I'm about five letters ahead of what I see, and I'm not *that* fast of a typist. I try to play a fullscreen mpeg at 1600x1200 and I get about 1 frame/sec.
Anyway, the machine wasn't like this when it was running NT4, so its either W2K's fault or poor drivers.
Heres the machine:
2x pII 400
Iwill DBS100 (i44BX, Adaptec 7895)
Adaptec 2930CU
Elsa Gladiac (nvidia geforce 2)
intel eepro100
creative live value
Now, my first thought was crappy display drivers. Unreal Tournament will bench at about 40fps, but will play like its running about 3fps.
Then I noticed that moving files around on disk, copying to/from my network would make explorer use 100% of one cpu for the duration of the copy, and the copy would take way too long, too. Its almost as if I had IDE disks using pio, not UW SCSI disks.
There are precious few optimizations that I found poking through the control panel. I'm sure there are many more in the registry. Has anybody seen this problem before? Any ideas on what the culprit might be, or at least some direction I can go toward finding whats going wrong?
Anyway, the machine wasn't like this when it was running NT4, so its either W2K's fault or poor drivers.
Heres the machine:
2x pII 400
Iwill DBS100 (i44BX, Adaptec 7895)
Adaptec 2930CU
Elsa Gladiac (nvidia geforce 2)
intel eepro100
creative live value
Now, my first thought was crappy display drivers. Unreal Tournament will bench at about 40fps, but will play like its running about 3fps.
Then I noticed that moving files around on disk, copying to/from my network would make explorer use 100% of one cpu for the duration of the copy, and the copy would take way too long, too. Its almost as if I had IDE disks using pio, not UW SCSI disks.
There are precious few optimizations that I found poking through the control panel. I'm sure there are many more in the registry. Has anybody seen this problem before? Any ideas on what the culprit might be, or at least some direction I can go toward finding whats going wrong?
Participate on our website and join the conversation
This topic is archived. New comments cannot be posted and votes cannot be cast.
Responses to this topic
r u running any programs when using windows 2000? use ctrl+alt+del and click on task manager and have a fiddle with that program. i think there is a lot of programs running at the same time and using up ur processor.
if u r running any utilites that try to improve ur computer's speed, forget it as windows runs better by itself.
------------------
2 Computers both have :
Intel SE440BX2
Pentium III 700Mhz (100)
LS-120 120 Mb (100MHz)
Fujitsu 17.3 GB Ultra DMA 66/10.2 GB Ultra DMA 66
Mitsubihi 50X IDE
Creative Vibra PCI 128bit
Matrox Millenium G400 16Mb AGP/Diamond Speedstar 8Mb AGP
Bay Netgear 10/100PCI
Medium ATX Tower case
120W Multimedia
MS INternet KB (PS2)
MS Win2000 Pro
if u r running any utilites that try to improve ur computer's speed, forget it as windows runs better by itself.
------------------
2 Computers both have :
Intel SE440BX2
Pentium III 700Mhz (100)
LS-120 120 Mb (100MHz)
Fujitsu 17.3 GB Ultra DMA 66/10.2 GB Ultra DMA 66
Mitsubihi 50X IDE
Creative Vibra PCI 128bit
Matrox Millenium G400 16Mb AGP/Diamond Speedstar 8Mb AGP
Bay Netgear 10/100PCI
Medium ATX Tower case
120W Multimedia
MS INternet KB (PS2)
MS Win2000 Pro
Try ye olde take-everything-out-one-by-one and-see-what-happens trick. Uninstalling stuff in device manager as you go.
My latest build is slow and I've just noticed that I've got cards using bonkers IRQ's (31, 36, 40 & 128) and I'm wondering how the hell that happened. This could be my problem and I'm going to see if I can get eveything within the standard 15 (without sharing) to see if it helps.
Check your IRQ's too: is your embedded controller sharing resources with the add-in card ? Dissociate them and see if it helps. And, FFS, was dual channel U/W not enough for you (!).
My latest build is slow and I've just noticed that I've got cards using bonkers IRQ's (31, 36, 40 & 128) and I'm wondering how the hell that happened. This could be my problem and I'm going to see if I can get eveything within the standard 15 (without sharing) to see if it helps.
Check your IRQ's too: is your embedded controller sharing resources with the add-in card ? Dissociate them and see if it helps. And, FFS, was dual channel U/W not enough for you (!).
