
Windows Hardware

judicative
I am getting a DNS error when I try to go to a web site. ;( I can go to every other site out there. ( I like, I haven't really tried all of them ) The site I want to go to just updated or got a new site or something.

Help with PSC 604 Soundcard
stevanh
I bought a psc 604, i put it in the slot connected it to my cdrom. I went into BIOS and disabled my onboard sound. When i try to install the driver it says that the soundcard hasnt been installed. Yet Windows had already recognised the new hardware.

What do I use to upgrade my BIOS?
Island_Son
I'm running Win NT on a Pentium II / 350 Mhz / ASUS motherboard. The BIOS reads ASUS P2B ACPI BIOS REVISION 1007 / Award Modular BIOS v4. 51PG. How can I upgrade this BIOS? Thanks for anybodies help.

Promise PDC20276 ATA/RAID Controller...
jonifen
Hi all, I've got a bit of a problem with my PC at home. . . its not a major issue really and I can make do with it, but I'm sure in a month or two I'll be tearing my hair out over it (and being a male at the age of 22 (and living with 4 females).

ddr memory
RavishingRocket
how can i see how fast my ram is running? is there a prog that can show me what its running at? thanks

ASUS V9280 Video Driver Compatability
jlweaver
The driver that came with my ASUS V9280 Video Suite card installed okay even though I got the It has not been approved by XP message, however when I upgraded the driver from the ASUS web site (I chose the most up to date version) my whole system crashed when I booted up the next time and once I removed the updated ...

Elitegtoup (ECS) P6STMT motherboard INACCESSIBLE_BOOT_DEVICE
krick
I'm trying to install Windows 2000 on an Elitegtoup (ECS) P6STMT motherboard but I get a blue screen with 0x0000007B INACCESSIBLE_BOOT_DEVICE when it tries to boot into windows after installation. Are there any known problems with this board or its SiS 630ET chipset?.

help regarding p3 733 on 440BX m/b using a daughter card
444rt
HELLO EVERYONE, I Had a p3-450mhz slot1 cpu &440BX M/B,it worked fine for a year,but after that my pc wouldnot boot up,so i cleaned the cpu's contact with a tape head cleaner after that it would work fine for a couple of months,but after that again same problem,and one day even after cleaning,it didnot start,so i b ...

Budget Motherboard?
Mr@k21
I want to build a pc from scratch and would like to dabble in a bit of overclocking but cant find any motherboards for about £40 that have suitable bios options. Could anyone point me in the right direction?.

AX4SG-N
Atreyu
Anybody here have the Aopen AX4SG-N? If you have it, is anybody running SilentTek? If so, does anybody hear beeping when SilentTek turns the CPU fan off? If so, does anybody know how to disable that beeping? If so, how? It's annoying, and basically defeats the purpose of SilentTek.

ES1869 Plug and Play AudioDrive
scchicago
I am pretty sure this laptop I have has an ES1869 Plug and Play AudioDrive, however I have been unable to find a driver for it under NT 4. Its an old Compaq Presario 1621. It works perfectly on NT4 except for the sound problem.

Quietest 128MB AGP card?
ofelas
Here is what I need - 1. 128MB (can't justify the 256MB cards right now). 2. AGP interface with DVI 3. QUIET. . . 4. <$125. 00 I've seen a few fanless cards with heatsinks, are they reasonably stable/cool running? I guess not having a fan would make them a lot quieter.

Pure3d on XP Driver HELP
gonzo90017
I downloaded the drivers from the download page to use my Canopus Pure3d card on Windows XP. I unzipped it and installed the file. It then asks me to restart my computer but when I do I have no idea if the drivers where installed since it gives me no indication as to what directory it puts them in.

Computer is gone?
Ace
Ok, so about 2 days ago, when I got back from school a terrible thing happened to my computer. Now the monitor was in power save mode like it should be, but the tower only showed that the computer was running but theres no loading.

Hardware upgrade
TPJ2988
Hi everyone, i am planning on upgrading my comptuer and my current layout is a: -pentium4 2. 0ghz -intel graphics chip(planning on getting 9600 XT) -256mb of SDRAM(planning on getting a corsair 512 mb to add to that, its one of the XMS ones the emtreme platinum) -im not sure what else you want to know if you do ema ...

How do I get WinXP drivers in Win2k?
Marker0077
I have a Panasonic KX-P2135 printer but the drivers for it are Win98/Win3. 1 & they do not work in Win2k/WinXP. Now the server we have is Win2k (which is where all the shared resources, shared printers, etc; etc.

cd drive "not ready" + burner install question
Nate
Hi all, about 3-4days ago my cd drive started giving me a message that it's not ready with options to re try or cancle I've not changed anything on my comp lately that I can think of. I did get a cleaning cd (with the little fuzzy thing on it) and a can of air to blow it out.

Sound card is broken?
Ace
My speakers were plugged into the back of my computer where the sound card is. The sound card is integrated and I thnk it's somewhat busted. First, the sound only comes from one speaker while the other has sound but it's very quiet.

Buzzing sound coming from system...
Lotus
I have a friend whos powersupply went in her system. We found her a new case with a P4 powersupply, and made the transition. After getting everything in the new case, we tried it out. As soon as we plugged in the powercord, a buzzing started.

Help with Orchid Righteous 3d 2 driver for Win Xp..please!
Kuro Neko
Hello, I used to have Win 95, but recently upgraded to Win XP. I have an Orchid Righteous 3d 2 card, and it have worked fine all until now. . Since Orchid haven't made any drivers for Win XP. . I wonder if anyone could help me.